Yamaha DVX-S60 Owner's Manual download pdf (Page 23)

E-19

Picture zoom [DVD] [Video CD]

1. Press the SHIFT + 4 ZOOM buttons during play. The central part of the

picture is magnified.

- Each time you press the SHIFT + 4 ZOOM buttons or press the

RETURN button, the picture zooms in or out (“Zoom +15” – “Zoom

–15”).

- Each time you press the 4, a, 5 or b button, the picture moves

from side to side, up and down.

2. To return to normal play, press the CANCEL button.

Note:

Picture zoom operation may not work with some discs.

Viewing from a desired camera angle (Multi-Angle)

[DVD]

Some DVD discs may contain scenes which have been shot simultaneously

from a number of different camera angles. The jacket or case of a disc that

are recorded with multi-angle scenes will be marked.

Example:

Note: The recorded angles differ depending on the disc used.

1. Play the disc that is recorded with multi-angle scenes.

2. Press the SHIFT + 2 ANGLE buttons repeatedly until the desired

angle appears.

Example:

Angle replay [DVD]

During playing a Multi-angle scene, press the SHIFT + 3 REPLAY buttons.

The player skips back to last approximately 10 seconds, then changes it

to the next camera angle and plays it, and continues play. (If desired, press

both buttons again.)

Repeat play

Press the REPEAT button during play (or programmed play) of the title (or

track) you want to repeat. Each time the button is pressed, the repeat

mode changes as follows.

[DVD]

Title (1 REP.): Repeat of the title being played

Off: Normal play mode

[Video CD] [CD]

1 (1 REP.): Repeat of the track being played

All (ALL REP.): Repeat all tracks

Off: Normal play mode

Note:

- Repeat play mode may not work correctly with some discs.

- Repeat play does not work during menu play of a Video CD with

playback control.

Programmed play [Video CD] [CD]

Up to 32 selections can be programmed.

Programming procedure

1. Press the PROGRAM button in the stop mode. “PROGRAM” screen

appears. “PROG.” flashes and “Pr 1” appears on the display.

2. Press the number button(s) to select the track number.

Example:

To select track No. 3, press 3.

To select track No.10, press 1, then 0.

To select track No.24, press 2, then 4.

Note:

- If you made a mistake, press the CANCEL button.

- Do not use the

≥10 button.

- Press the PROGRAM button to quit this menu.

3. Press the ENTER button. The highlighted box automatically moves to

the next program number.

Example:

4. Repeat step 2–3 above to select another track.

5. Press the button to start play. “PROG.” remains lit.

When all programmed selections have played, the player stops

automatically.

- The program contents are retained in memory.

To clear the program one by one

In the programming mode, press the 4 or 5 button to select the program

number. Then press the CANCEL button.

To clear all the programs

In the programming mode, press the n button.

To change the program

1. In the programming mode, press the 4 or 5 button to select the

program number.

2. Press the number button(s) to select the track number to be replaced,

then press the ENTER button.

To use the program again with the same contents

Press the PROGRAM button to call up the “PROGRAM” screen, then

press the

button.

PROGRAM

# Track Track Time

1 0 2 00 : 04 : 57

_ _

00 : 04 : 57

Total programmed time

A3-60U-E (02.7.26)a 02.8.8, 3:39 PM19

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31

Comments to this Manuals

No comments

Yamaha DVX-S60 Owner's Manual Page 23

Comments to this Manuals

Related products and manuals for AV receivers Yamaha DVX-S60