Yamaha V1 Owner's Manual download pdf (Page 366)

Chapter 6 Component Guide

DME Designer Owner’s Manual

366

■ All Inputs to One Output

When you click the output channel number on the matrix, the [Delay Matrix - All Inputs to One

Output] editor window opens. All input channels and one output channel are displayed. The output

channel is the one you have clicked on in the delay mixer component editor.

Output Channel Switching

The [Delay Matrix - All Inputs to One Output] editor window displays the output channel clicked on

in the delay matrix component editor. The [Channel] buttons in the [Output] section of the [Delay

Matrix - All Inputs to One Output] editor window switch the channel group that is displayed in the

window.

If you make the delay matrix component editor active while the [Delay Matrix - All Inputs to One

Output] editor window is displayed, and then click another output channel, that channel group will

be displayed in the [Delay Matrix - All Inputs to One Output] editor window.

One [Delay Matrix - All Inputs to One Output] editor window is displayed for each delay matrix

component editor.

Section Parameter Setting Range Function

1 Bus Send Level Delay 0 to 500 Sets the delay time for each input channel.

2 Level -∞ to +10 dB Sets the output signal level for each input channel.

3 On ON/OFF Turns ON the output for each input channel.

4 Output Channel -- Displays the selected output channel. Select

another channel from a menu.

5 On ON/OFF Turns ON the output for the channel displayed in

the window.

6 Meter -- Displays the output signal level of the channel

displayed in the window.

7 Block On -- Turns ON all channel inputs. When turned ON, the

[On] button lights up.

8 Off -- Turns OFF all channel inputs.

9 Nominal -- Resets all of input signal levels, making them 0 dB.

) Minimum -- Resets all of input signal levels, making them -∞ dB.

)

1 2 ... 361 362 363 364 365 366 367 368 369 370 371 ... 426 427

No comments

Yamaha V1 Owner's Manual Page 366