Yamaha MG206c-USB Owner's Manual download pdf (Page 15)

Reference

Front & Rear Panels

MG206C/MG166CX/MG166C Owner’s Manual

1 FOOT SWITCH Jack

A Yamaha FC5 foot switch (sold separately) can be connected to this jack

and used to toggle the digital effects ON and OFF.

2 PROGRAM Dial

Selects one of the 16 internal effects. See page 19 for details about the

internal effects.

3 PARAMETER Control

Adjusts the parameter (depth, speed, etc.) for the selected effect. The last

value used with each effect type is saved.

When you change to a different effect type, the mixer automatically

restores the value that was previously used with that type (regard-

less of the current position of the PARAMETER knob).

These parameter values are reset when the power is turned off.

4 AUX Control

Adjusts the level of the signal sent from the internal digital effect unit to

the AUX buses.

The signal level sent to the AUX buses is not affected by the

EFFECT RTN fader.

5 ON Switch

Switches the internal effect on or off. The internal effect is applied only if

this switch is turned on. The switch lights orange when on.

An optional Yamaha FC5 foot switch (sold separately) can be used to tog-

gle the digital effects ON and OFF.

The ON switch lights and the internal effect unit is active when the

power is initially turned on.

6 PFL Switch

Turn this switch on to send the effect signal to the PFL bus.

7 1-2 Switch

This switch assigns the effect signal to the GROUP 1/2 bus.

8 3-4 Switch

This switch assigns the effect signal to the GROUP 3/4 bus.

9 ST Switch

This switch assigns the effect signal to the STEREO L/R bus.

0 EFFECT RTN Fader

Adjusts the signal level sent from the internal digital effect unit to the STE-

REO bus.

NOTE

Digital Effects * Only the MG166CX has digital effects.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 28 29

No comments

Yamaha MG206c-USB Owner's Manual Page 15