Yamaha AW2816 Owner's Manual download pdf (Page 12)

Tutorial

■ Adding the synthesizer

Turn channel 10 “ON”. If the synthesizer is too loud

for the other tracks, use fader 10 to lower the level

about 5 dB.

■ Adding the organ

Turn channel 11 “ON”. Make ﬁne adjustments to the

fader so that the sound does not stand out in compari-

son with the other tracks.

■ Adding the electric guitar

Turn channel 11 “ON”. Compared to the other tracks,

the electric guitar track will have a more intense sense

of volume, so you might use fader 12 to lower the

level about 10 dB.

■ Adding the lead vocal

Some of you probably expected to add the chorus

(tracks 13/14/15) before adding the lead vocal, but in

order to set appropriate levels for the chorus, it is

important to hear it in relation to the lead vocal level.

Turn channel 16 on, and with the pan left in the cen-

ter (the usual position for the lead vocal), set the fader

at approximately nominal level (0 dB).

■ Adding the chorus

In the intro, the chorus enters before the lead vocal,

and in the ﬁnal mix a certain amount of automation

will be necessary. But for now, listen to a section of

the song where the lead vocal is heard together with

the chorus, and adjust the level of the chorus section.

Turn on channels 13/14/15, and raise the fader levels

to a point where they will not interfere with the lead

vocal on track 16.

■ Listening to the rough mix

Although you have already listened to the song

numerous times while creating the rough mix, now

you will listen to the entire song, rather than to an

individual part. Make adjustments as desired.

■ Saving the song

To save the song, press the WORK NAVIGATE section

[SONG] key to access the SONG screen. As neces-

sary, press the [F1] key to display the Song List page.

Move the cursor in the screen to “SAVE,” and press

the [ENTER] key. When the conﬁrmation window

appears, move the cursor to “OK” and press the

[ENTER] key. The song has now been saved.

■ Saving the scene

Let’s save the completed rough mix. Press the SCENE

key, and use the [DATA/JOG] dial to select a vacant

scene that is displayed as “No Data!” Then move the

cursor to “STORE” and press the [ENTER] key. The

TITLE EDIT popup window will appear, so assign a

name (or leave it unassigned), select “OK” and press

the [ENTER] key.

You can alternately select this scene and another

scene to compare the pre-made rough mix with your

own.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 30 31

Comments to this Manuals

No comments

Yamaha AW2816 Owner's Manual Page 12

Comments to this Manuals

Related products and manuals for Audio mixers Yamaha AW2816