Yamaha 02R96 Owner's Manual download pdf (Page 47)

34 Chapter 3—Operating Basics

02R96—Owner’s Manual

Selecting Channels

To select Input and Output Channels for editing with the SELECTED CHANNEL controls,

you use the LAYER buttons to select a Layer, and the [SEL] buttons to select a channel on

that Layer.

1 Select a Layer, as explained on page 33.

2 Use the [SEL] buttons to select an Input or Output Channel.

The [SEL] button indicator for the currently selected channel lights up. In addi-

tion, the Channel’s ID and Short name appear in the upper right corner of the dis-

play (see page 30).

The exact channel selected by each [SEL] button depends on the currently selected Layer.

For example, when Layer 1–24 is selected, [SEL] button #1 selects Input Channel #1. When

Layer 25–48 is selected, it selects Input Channel #25. And when the Master Layer is selected,

it selects Input Channel #49, as shown in the following table.

For paired Input or Output channels, the channel whose [SEL] button you press is selected,

and its indicator lights up. The [SEL] button indicator of the other channel ﬂashes.

Vertical and horizontal Input and Output channel partners can also be selected by using the

SELECTED CHANNEL PAN/SURROUND [L] and [R] buttons, which can also be used to

select left and right channels when the Stereo Out is selected.

If the currently displayed page contains a relevant parameter, when a channel’s [SEL] but-

ton is pressed, the cursor moves to that parameter automatically. If the currently displayed

page contains no such parameter, the page that does contain such a parameter is selected

automatically. For example, if a Delay page for the Output Channels is selected when an

Input Channel [SEL] button is pressed, the Delay page showing the relevant Input Channel

Delay parameter is selected automatically.

Stereo Out [SEL] Button

The Stereo Out [SEL] button is used exclusively to select the Stereo Out for editing with the

SELECTED CHANNEL controls. Its indicator lights up when the Stereo Out is selected.

Each time it’s pressed, the selection toggles between the Stereo Out’s left and right channels.

The SELECTED CHANNEL PAN/SURROUND [L] and [R] buttons can also be used to

select the left and right channels.

If the currently displayed page contains a Stereo Out parameter, that parameter is selected

automatically when the Stereo Out [SEL] button is pressed. If the currently selected page

contain no such parameter, the page that does contain such a parameter is selected auto-

matically. For example, if a Delay page for the Input Channels is currently selected when the

Stereo Out [SEL] button is pressed, the Delay page showing the Stereo Out Delay parameter

is selected automatically.

Auto Channel Select & Touch Sense Select

While the Auto Channel Select preference is on (see page 197), channels can be selected by

moving the corresponding fader or Encoder, or by turning on the corresponding [AUTO],

[SOLO], or [ON] button. While the Touch Sense Select preference is on (see page 199),

channels can be selected simply by touching the fader knobs.

Layer

[SEL] Button

1–89–16 17–24

1-24

Input Channels 1–24

25–48

Input Channels 25–48

MASTER

Input Channels 49–56 Aux Sends 1–8 Bus Outs 1–8

REMOTE

Operation depends on the selected target. See “About the Remote Layer” on page

189 for more information.

SEL

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 314 315

Comments to this Manuals

No comments

Yamaha 02R96 Owner's Manual Page 47

Comments to this Manuals

Related products and manuals for Audio mixers Yamaha 02R96