Yamaha V96i Owner's Manual download pdf (Page 16)

Using 01V96 Editor

Windows

Getting StartedKeyboard ShortcutsIndex

01V96i Editor—Owner’s Manual

Windows

 Stereo Input Channels

1 CHANNEL SELECT, INPUT PATCH & LIBRARY section

Channels can be selected by clicking the Channel ID and selecting from the list that appears, or by

clicking the left and right Channel Select buttons. The long channel name is displayed below the Chan-

nel ID. To edit the name, click it and type. The INPUT PATCH parameter is used to select an input

source. To select an input, click the parameter and choose from the list that appears. The LIBRARY

button opens the Channel Library window.

2 PHASE section

This section contains the phase control for the currently selected Stereo Input Channel. The PHASE

button reverses the channel’s signal phase.

3 EQUALIZER section

This section contains the EQ controls and display graph for the currently selected Stereo Input Chan-

nel. The rotary controls are used to set the gain, center frequency, and Q of each band, and the pre-EQ

attenuation level. EQ can also be set by dragging the EQ curve on the EQUALIZER graph. The ON

button turns the EQ on and off. The TYPE buttons select the EQ type. The LIBRARY button opens

the Equalizer Library window.

4 Routing, pan & level section

This section contains the routing, pan, and level controls and the, SOLO, and ON buttons for the cur-

rently selected Stereo Input Channel. ROUTING buttons 1–8 are used to route the channel to the Bus

Outs. The STEREO button routes the channel to the Stereo Out. The DIRECT button routes the chan-

nel to its Direct Out, and the Direct Out parameter below it selects a Direct Out destination. The

F.PAN button turns on and off the Bus Out Follow Pan function. The PAN control is used to pan the

channel. The SOLO button is used to solo the channel, the ON button, to turn on and off the channel,

and the channel fader, to set the channel level.

5 AUX SEND section

This section contains the Aux Send controls for the currently selected Stereo Input Channel. Use the

rotary controls to set the Aux Send levels, and click them to turn Aux Sends on and off. Use the button

below each Aux Send control to select pre-fader or post-fader. In Fixed mode, this button is used to

turn Aux Sends on and off (the level is fixed at nominal).

When Aux Sends are paired, a heart icon is displayed between them, and the odd-numbered Aux Send

control sets the level, while the even-numbered control works as a pan control.

123 4

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 33 34

No comments

Yamaha V96i Owner's Manual Page 16