Yamaha AX-390 Owner's Manual download pdf (Page 3)

English

Thank you for selecting this YAMAHA stereo amplifier.

●

60W + 60W (8Ω) RMS Output Power, 0.04% THD,

20–20,000 Hz

●

High Dynamic Power, Low Impedance Drive

Capability

●

Continuously Variable Loudness Control

●

CD DIRECT AMP Switch to Reproduce the Purest

CD Sound

●

Remote Control Capability

Supplied Accessories .....................................................2

Caution ...........................................................................3

Controls and Their Functions .........................................4

Connections ...................................................................6

Basic Operations ............................................................8

Notes about the Remote Control Transmitter................11

Troubleshooting ............................................................12

Specifications ...............................................................13

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

FEATURES CONTENTS

1. To assure the finest performance, please read this manual

carefully. Keep it in a safe place for future reference.

2. Install this unit in a cool, dry, clean place – away from

windows, heat sources, sources of excessive vibration,

dust, moisture and cold. Avoid sources of humming

(transformers, motors). To prevent fire or electrical shock,

do not expose the unit to rain or water.

3. Never open the cabinet. If something drops into the set,

contact your dealer.

4. Do not use force on switches, controls or connection

wires. When moving the unit, first disconnect the power

plug and the wires connected to other equipment. Never

pull the wires themselves.

5. The openings on the cabinet assure proper ventilation of

the unit. If these openings are obstructed, the temperature

inside the cabinet will rise rapidly. Therefore, avoid

placing objects against these openings, and install the unit

in well-ventilated condition. Make sure to allow a space of

at least 10 cm behind, on the both sides and above the top

panel of the unit. Otherwise it may not only damage the

unit, but also cause fire.

6. Always set the VOLUME control to “–

∞

” before starting

the audio source play. Increase the volume gradually to an

appropriate level after playback has been started.

7. Do not attempt to clean the unit with chemical solvents;

this might damage the finish. Use a clean, dry cloth.

8. Be sure to read the “TROUBLESHOOTING” section

regarding common operating errors before concluding that

the unit is faulty.

9. When not planning to use this unit for long periods of time

(ie., vacation, etc.), disconnect the AC power plug from the

wall outlet.

10.To prevent lightning damage, disconnect the AC power

plug and disconnect the antenna cable when there is an

electrical storm.

11.Grounding or polarization – Precautions should be taken

so that the grounding or polarization of an appliance is not

defeated.

12.AC outlet

Do not connect audio equipment to the AC outlet on the

rear panel if that equipment requires more power than the

outlet is rated to provide.

13.Voltage Selector (General Model only)

The voltage selector on the rear panel of this unit

must be set for your local main voltage BEFORE

plugging into the AC main supply.

Voltages are 110/120/220/240V AC, 50/60 Hz.

IMPORTANT

Please record the serial number of this unit in the space

below.

Serial No.:

The serial number is located on the rear of the unit.

Retain this Owner’s Manual in a safe place for future

reference.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

The apparatus is not disconnected from the AC power

source as long as it is connected to the wall outlet, even if

the apparatus itself is turned off.

1 2 3 4 5 6 7 8 ... 13 14

Comments to this Manuals

No comments

Yamaha AX-390 Owner's Manual Page 3

Comments to this Manuals

Related products and manuals for Audio amplifiers Yamaha AX-390