Yamaha TSX-W80 Owner's Manual Page 15

  • Download
  • Add to my manuals
  • Print
  • Page
    / 16
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 14
SPECIFICATIONS
11 En
English
PLAYER SECTION
iPod
Supported iPod .....iPod (5th generation), iPod classic, iPod
nano, iPod touch, iPhone, iPhone 3G, iPhone 3GS
AUX IN
Input connector
............STEREO L/R: 3.5 mm (1/8 in) STEREO mini Jack
AMPLIFIER SECTION
Maximum output power ..........................4 W + 4 W + 8 W
(6 Ω 1 kHz, 10% THD)
Driver unit ...................4 cm (1 5/8 in) full-range driver × 2
5.5 cm (2 1/8 in) woofer + SR-BASS × 1
TUNER SECTION
Tuning range
FM...................................................87.50 to 107.90 MHz
AM ......................................................... 530 to 1710 kHz
TRANSMITTER SECTION
Frequency ............................................................... 2.4 GHz
Transmission range.......................... Approx. 20 m (65.6 ft)
(without interference)
Number of units which can be simultaneously
transmitted to................................................... Up to 7 units
(depending on the circumstances)
GENERAL
Power Supply........................................... AC 120 V, 60 Hz
Power consumption .....................................................10 W
System off consumption .............................................3.5 W
Standby consumption...................................... 1.0 W or less
Dimensions (W × H × D)...................260 × 90.3 × 141 mm
(10 1/4 × 3 1/2 × 5 1/2 in)
Weight......................................................... 1.2 kg (2.6 lbs.)
Specifications are subject to change without notice.
iPod™, iPhone™
iPod is a trademark of Apple Inc., registered in the U.S. and
other countries.
iPhone is a trademark of Apple Inc.
“Made for iPod” means that an electronic accessory has been
designed to connect specifically to iPod and has been
certified by the developer to meet Apple performance
standards.
“Works with iPhone” means that an electronic accessory has
been designed to connect specifically to iPhone and has been
certified by the developer to meet Apple performance
standards.
Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards.
Remote control
Problem Cause Solution
The remote control does not
work properly.
The remote control may be operated
outside its operation range.
For information on the remote control
operation range, refer to “Using the remote
control” ( P. 1).
The remote control sensor on the unit
may be exposed to direct sunlight or
lighting (inverted fluorescent lamps).
Change the lighting or orientation of the
unit.
The battery may be worn out. Replace the battery with a new one
( P. 1).
There are obstacles between the sensor of
the unit and the remote control.
Remove the obstacles.
Wireless communication is not
established when SOURCE is set to
iPod.
Play the iPod to establish wireless
communication ( P. 6).
SPECIFICATIONS
Page view 14
1 2 ... 10 11 12 13 14 15 16

Comments to this Manuals

No comments