Yamaha SM10IV User Manual download pdf (Page 4)

−4−

Connecting the Speakers

CONNECTION EXAMPLE 1

The illustration below shows audio connections for a standard setup using two speaker systems.

MIXING

CONSOLE

GRAPHIC

EQUALIZER

SPEAKER

SYSTEMS

SPEAKER

SYSTEMS

DAISY-CHAINED

POWER

AMPLIFIER

DAISY-CHAINING SPEAKERS

Since the speaker systems in this series are equipped with two input terminals that are internally connected in parallel, it is

possible “daisy-chain” speakers by connecting the output from the power amplifier to one phone jack, and a second speaker

system to the other.

All speaker models in this series have a nominal impedance of 8Ω. Since most power amplifiers are designed to provide stable

performance at a load impedance of 4 or 8Ω, Yamaha recommends that no more than two 8Ω speaker systems be daisy-chained

together. This will allow the amplifier to operate properly and avoid overheating.

PHONE PLUG WIRING

The standard input terminals for this unit are 1/4" phone jacks. Connect the speaker leads as shown in this diagram.

Caution: Use only unshielded speaker cable with stranded conductors to connect speakers to the speaker terminals on a power

amplifier. The use of audio cable not rated as sufficient for the amplifier’s maximum output level can create a potential fire

hazard.

1 2 3 4 5 6 7 8 9 ... 35 36

No comments

Yamaha SM10IV User Manual Page 4