Yamaha YSTMS50 Owner's Manual download pdf (Page 5)

English

Thank you for purchasing Yamaha’s YST-MS50 Powered Multimedia Speakers. Advanced Yamaha Active Servo

Technology offers exceptionally high performance, allowing these compact speakers to produce a rich bass sound.

Cautions

Please read the following operating precautions before

use:

• When you disconnect the AC power cable from an

AC outlet, hold the plug, not the cord.

• If the YST-MS50s are not going to be used for a

while, disconnect the AC power cord from the AC

receptacle.

• Always disconnect the AC power cord from the AC

receptacle before making any connections.

• The YST-MS50s do not contain any user service-

able parts. Refer all servicing to your Yamaha

dealer.

•

Never open the cabinet.

If a foreign object drops

into the set, contact your dealer, and do not use the

YST-MS50s. Otherwise, you may cause a ﬁre.

• Do not expose the YST-MS50s to temperature

extremes, direct sunlight, excessive dust, humidity,

or vibration.

• Position the YST-MS50s on a level, stable surface.

Do not drop the YST-MS50s, apply excessive force

to their controls, or put heavy items on top of them.

• Since this unit has a built-in power ampliﬁer, heat

will radiate from the rear panel. Therefore, place

the unit away from walls, allowing enough space

above, behind, and on both sides of the unit. Also,

do not position with the rear panel facing down on

the ﬂoor or other surface. (Subwoofer only)

• Do not obstruct the port with your hand or a foreign

object.

• To protect the YST-MS50 speakers, avoid micro-

phone feedback, continuous and excessive output

from electronic musical instruments, and excessive

signal distortion.

• If the YST-MS50s are located close to ﬂuorescent

or neon lights, a slight hum may be heard. In this

case, relocate the YST-MS50s away from the light.

• Although the YST-MS50 speakers are magnetically

shielded, keep ﬂoppy disks and tapes away from

them.

• The YST-MS50s may cause picture distortion when

located close to a television or computer monitor. In

this case, move them away a short distance.

• Avoid sources of hum (transformers, motors). To

prevent ﬁre or electrical shock, do not expose to

rain and water.

• Do not use force on switches, knobs, or cables.

When you move the YST-MS50, ﬁrst turn off the

power to the speakers, then disconnect the power

cable from the AC outlet and the cables from the

connected devices.

• Always turn the volume control counterclockwise

to the minimum before starting to play the audio

source: increase the volume gradually to an appro-

priate level after the playback has started.

• Do not turn off the POWER switch on the sub-

woofer while the (standby/on) button on the

front panel of the right satellite speaker is on (while

the standby/on indicator is lit). Otherwise, the

speakers may be damaged.

Connections & Controls

Refer to the illustrations on page 1.

BASS control:

Use this control to adjust the vol-

ume of the subwoofer. We recommend that the

control be set to the 12 or 1-o’clock position. Turn

it clockwise to increase the volume; counterclock-

wise to decrease it.

Main POWER switch:

Normally, leave this

switch in the ON position. When you will not use

this unit for a long period of time, set this switch to

the OFF position.

TO RIGHT SPEAKER:

Using the 8 pin plug

cable, connect this jack to the TO SUB Wo. jack

on the satellite right speaker.

TO LEFT SPEAKER:

Using the RCA pin plug

cable, connect this jack to the TO SUB Wo. jack

on the satellite left speaker.

(standby/on) button and indicator:

Press the

(standby/on) button to turn on the YST-MS50s;

the standby/on indicator lights up. Press again to

turn off. Turn down the VOLUME control before

turning on and off the YST-MS50s.

A small amount of power is always consumed

even while the YST-MS50s are on standby.

(Headphone):

A pair of stereo headphones can

be connected here for private listening. The YST-

MS50 speakers do not produce sound when head-

phones are connected to this jack.

VOLUME control:

Use this control to adjust the

volume of the left and right speakers. Turn it

clockwise to increase the volume; counterclock-

wise to decrease it.

INPUT 1 and 2:

These 3.5 mm stereo mini jacks

are used to input signals independently to the YST-

MS50. You can, for example, connect a CD player

and personal computer to these jacks. The signals

from these jacks are mixed together.

TO SUB Wo. (on the right):

Using the 8 pin plug

cable, connect this jack to the TO RIGHT

SPEAKER on the subwoofer.

TO SUB Wo. (on the left):

Using the RCA pin

plug cable, connect this jack to the TO LEFT

SPEAKER jack on the subwoofer.

1 2 3 4 5 6 7

Comments to this Manuals

No comments

Yamaha YSTMS50 Owner's Manual Page 5

Comments to this Manuals

Related products and manuals for Unknown Yamaha YSTMS50