Yamaha R-N500 User Manual download pdf

Firmware Update Procedure for R-N500

IMPORTANT NOTICE

Follow the instructions carefully and do not attempt any other procedures not specified in the instructions

provided by Yamaha.

Improperly updated products may cause improper operation, and any parts or service required to restore

proper operation will not be covered under the Yamaha Limited Warranty.

Choose from the following 2 methods to update to the latest firmware.

Click here for Firmware Update Through the Internet

(Connection to the Internet is required)

Click here for Firmware Update by USB

(A USB thumb drive is required)

In case of error, see the Troubleshooting section

[ 1. Firmware Update Through the Internet ]

Requirements:

Your R-N500 is connected to the Internet if you can receive

Internet radio stations. (See owner’s manual for details)

STEP 1 Turn off the unit.

STEP 2 While holding down RETURN on the front panel, press power.

STEP 3 “ADVANCED SETUP” will be shown for seconds.

STEP 4 Rotate SELECT/ENTER to select firmware update mode as shown below.

RETURN

SELECT/ENTER

POWE

DISPLAY

DIMMER

1 2 3 4

Page 1

Firmware Update Procedure for R-N500 IMPORTANT NOTICE Follow the instructions carefully and do not attempt any other procedures not specified in the

Page 2

Firmware Update Procedure for R-N500 STEP 5 Press SELECT/ENTER repeatedly to select “NETWORK” STEP 6 Press DISPLAY to start the update. (On

Page 3

Firmware Update Procedure for R-N500 STEP 1 Turn off the unit. STEP 2 Insert the USB thumb drive on the front panel. STEP 3 While holding down

Firmware Update Procedure for R-N500 note: DO NOT interrupt the power or press any buttons during the update. In case the power is accidentally cut

No comments

Yamaha R-N500 User Manual