En 11
English
Listening to external sources
This unit allows playback of external devices connected to the AUX IN terminal. A commercially available 3.5 mm stereo mini-plug cable (diameter: 12 mm (0.47 in)
or less) is required for this connection. Be sure to turn off the unit by pressing before connecting the external device.
Connecting an external
device
1 Remove the cover on the rear of the
unit.
2 Pass the cable through the hole
underneath and pull it out from the
bottom of the base.
3 Connect the cable to the AUX IN
terminal.
4 Connect the other end of the cable to
the external device.
Playing back
1 Press to turn on the unit.
2 Play back the external device.
• For details on playback, see the owner’s manual
supplied with the external device.
• Decrease the volume of the unit and the external device before connection.
• If both a Bluetooth device and external device are played back, sound from both devices will be heard.
3.5 mm stereo mini-plug cable
AUX IN
1
2
3
4
External
device
Comments to this Manuals