Yamaha QL5 User's Guide download pdf (Page 13)

QL5/QL1 Firmware Update Guide 13

running.

Click [Start].

The update operation will begin.

“Updating(n/m)” appears in the Status field during updating. “Done” is displayed once update is completed.

Update takes 2 to 4 minutes. During the update operation, do not turn off the power to the unit or disconnect the

cable. If update fails due to disconnection of the power cable during the update, or due to other reasons, the device

may become inoperative.

・ If update is not completed after 5 minutes, or update failure indication appears, click X at the upper right

corner of Dante Firmware Update Manager to exit the program

without turning the QL power off

, and

restart the procedure from the step 4. If update still fails, follow the instructions stated in “About Failsafe

Mode” to perform the recovery processing.

Restart the QL series.

The firmware update is now complete.

1 2 ... 8 9 10 11 12 13 14 15 16 17

No comments

Yamaha QL5 User's Guide Page 13