Yamaha 9000 Pro User Manual download pdf (Page 63)

Organ Flutes

Reference 63

Vibrato Depth Can be set to any of three levels via the Vibrato Depth LCD button. The button sequen-

tially selects a depth of “1”, “2”, or “3”.

Footage The footage settings determine the basic sound of the organ flutes.

The term “footage” is a reference to the sound generation of traditional pipe organs, in

which the sound is produced by pipes of different lengths (in feet). The longer the pipe,

the lower the pitch of the sound. Hence, the 16’ setting determines the lowest pitched

component of the voice, while the 1’ setting determines the highest pitched component.

The higher the value of the setting, the greater the volume of the corresponding foot-

age. Mixing various volumes of the footages lets you create your own distinctive organ

sounds.

Volume Adjusts the overall volume of the Organ Flutes. The longer the graphic bar, the greater

the volume.

Mode The MODE control selects between two modes: FIRST and EACH. In the FIRST

mode, attack is applied only to the first notes played and held simultaneously; while the

first notes are held, any subsequently played notes have no attack applied. In the

EACH mode, attack is applied equally to all notes.

Attack The ATTACK controls adjust the attack sound of the ORGAN FLUTE voice. The 4’, 2

2/3 ‘ and 2’ controls increase or reduce the amount of attack sound at the corresponding

footages. The longer the graphic bar the greater the attack sound.

Length The LENGTH control affects the attack portion of the sound producing a longer or

shorter decay immediately after the initial attack. The longer the graphic bar the longer

the decay.

Response The Response control affects both the attack and sustain portion of the sound, increas-

ing or decreasing the response time of the initial swell and release, based on the

FOOTAGE controls. The higher the value the slower the swell and release.

Reverb Depth

Chorus Depth

DSP on/off

DSP Depth

For details about the digital effects, see page 145.

Vibrato Speed Determines the speed of the vibrato effect controlled by the Vibrato On/Off and Vibrato

Depth above.

DSP Type Determines the DSP effect type to be applied to the Organ Flutes voice. Normally this

will be one of the six available Rotary Speaker effects. If any other type of effect is se-

lected the Rotary SP Speed LCD button in the main ORGAN VOICE editing display will

not control rotary speaker speed. Instead, it will have the same effect as the VOICE

EFFECT [SLOW/FAST] button.

Slow/Fast Slow/Fast Determines whether the DSP variation (Slow/Fast) will be set to Slow or Fast when the

Organ Flutes voice is selected (when the Voice Set function is ON — page 163).

Value Sets the DSP variation (Slow/Fast) parameter value (e.g., “LFO Freq” for a Rotary

Speaker effect) when the DSP variation (Fast) is turned on.

EQ Low

EQ High

The EQ parameters determine the Frequency and Gain of the Low and High EQ bands.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 249 250

Comments to this Manuals

No comments

Yamaha 9000 Pro User Manual Page 63

Comments to this Manuals

Related products and manuals for The input devices Yamaha 9000 Pro