Yamaha PLG150 Owner's Manual download pdf (Page 11)

Installing and Starting the Plug-in Editor Software

(Windows 95/98)

Installing the Software

Double-click the “Setup.exe” ﬁle in the “Plug_” folder on the ﬂoppy disk to start the installation.

Click “Next” or “Yes” and follow the subsequent instructions on the screen to complete the installa-

tion.

Starting the PF Easy Editor

Start XGworks (or XGworks lite).

Click the “Plug-in” menu and select “PF

Easy Editor.”

Alternately, press Alt + P, then D, and ENTER. The

“Select PF Part” dialog box appears.

Set the desired Part number and click “OK.”

The PF Easy Editor window appears.

If the PLG150-PF has been prop-

erly installed and all computer/

MIDI connections have been

properly made, operating the PF

Easy Editor should directly affect

the PLG150-PF. For details on

using the PF Easy Editor, refer to

the on-line help ﬁle that is

included with the software.

When using a Modular Synthesis Plug-in System “mother” device, the Part assignment depends on

which mode is used — Voice or Performance — and also on whether the PLG150-PF board is

installed/assigned to PLG1 or PLG2, as described below.

When using the Voice mode:

Depending on which slot the PLG150-PF board has been installed to, press PLG1 or PLG2, then

set the Part to “1” (no matter what the PLG1 or PLG2 assignment is).

When using the Performance (Multi) mode:

If the PLG150-PF board is assigned to PLG1, set the Part to “16.”

If the PLG150-PF board is assigned to PLG2, set the Part to “15.”

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 47 48

No comments

Yamaha PLG150 Owner's Manual Page 11