Yamaha CS6X Owner's Manual download pdf (Page 126)

126

Performance Mode

CTL Assign1(Controller Assign 1)

Use Knobs [C], [1] and [2] to assign Control Numbers

to the Breath Controller, Knob [1] and Knob [2],

respectively. The selected function is shown on the left

of the display.

■ BC (Breath Controller)

Set Control Change Number assigned to the Breath

Controller. The Breath Controller is connected to

the BREATH jack (Page 18).

❏ Settings: Details are given in the separate Control List.

■ Knob1/2

Set Control Change Numbers assigned to Knobs [1]

and [2] on the front panel.

CTL Assign2 (Controller Assign 2)

Use Knobs [C] and [1] to assign Control Change

Numbers to the Foot Controller and Ribbon Controller,

respectively. The selected function is shown on the left

of the display. Use Knob [2] to select the Ribbon

Controller Mode.

■ FC (Foot Controller)

Assign a Controller Change Number to the Foot

Controller. The Foot Controller is connected to the

FOOT CONTROLLER jack on the rear panel (Page 18).

❏ Settings: Details are given in the separate Control List.

■ RB (Ribbon Controller)

Assign a Control Change Number to the Ribbon

Controller on the front panel. The Ribbon

Controller’s behavior depends on the Mode

parameter setting.

❏ Settings: Details are given in the separate Control List.

SHIFT PAGE

PART

ELEMENT

DATAA B C 1 2

CTLíAssign2) FC RB----Mode

Common [FootCtrl] 04 PB reset

Control Change Name

Control Change Number

Mode

SHIFT PAGE

PART

ELEMENT

DATAA B C 1 2

CTLíAssign1) BC Knob1 Knob2

Common [FootCtrl] 02 16 17

Control Change Name Control Change Numbers

■ Mode

Set the behavior of the Ribbon Controller. If you

select “hold,” the parameter controlled by the

Ribbon Controller will hold its value even after you

release it. If you select “reset,” the value returns to

its default setting at the center of the Ribbon

Controller strip.

❏ Settings: hold, reset

Common EQ (Equalizer)

You can assign any of five different Equalizer bands to

the entire Performance. The following five screens are

available.

EQ Low

EQ LowMid (Low-Middle Range)

EQ Mid (Middle Range)

EQ HighMid (High-Middle Range)

EQ High

EQ Low

This Equalizer covers low frequencies. You can adjust

the signal level at the specified frequency. You can also

select different Equalizer types (Shapes).

■ Shape

Select either a Shelving or Peaking equalizer. The

Peaking type attenuates/boosts the signal at the

specified Frequency setting, whereas the Shelving

type attenuates/boosts the signal at frequencies

above or below the specified Frequency setting.

❏ Settings: shelv (Shelving), peak (Peaking)

shelv (Shelving)

Frequency

EQ Low

Freq1

EQ Low

Freq2

MEQíLow) Shape Gain Freq Q

Common peak +12dB 50Hz 12.0

Q (Frequency Characteristic)

Gain

Freq (Frequency)

1 ... 125 126 127 ... 196

Comments to this Manuals

Pop 05 Apr 2024 | 17:05:54

Okey

Yamaha CS6X Owner's Manual Page 126

Comments to this Manuals

Related products and manuals for Synthesizer Yamaha CS6X