Yamaha Rio1608 Owner's Manual download pdf (Page 18)

Troubleshooting

Owner’s Manual

Warning Messages

The indicators will light and/or flash as shown until the

cause is resolved.

If the green [SYNC] indicator is unlit, the unit’s clock is

unconfirmed.

If the green indicator is flashing, the unit is the clock

master.

If the green indicator is lit, the unit is the clock slave and the

clock is synchronized.

Information Messages

The indicators will remain lit and/or flashing cyclically to

report the status.

If the orange [SYNC] indicator is unlit, the unit is operating

normally.

If the green [SYNC] indicator is unlit, the unit’s clock is

unconfirmed.

SYNC Indicators Description Possible Solution

The word clock is not

set correctly.

Set the clock

master and

sampling frequency

correctly on the

Rio-native device or

in Dante Controller.

Dante Network circuit

is broken.

Make sure that the

Ethernet cables are

not removed or

short-circuited.

Other Dante-compatible

devices cannot be

found due to an

incorrectly-wired Dante

Network.

Make sure that the

Ethernet cables are

connected

correctly.

SYNC Indicators Description Possible Solution

A non-GbE-compatible

device is connected.

When transferring

audio via Dante,

use device that

supports GbE.

The [SECONDARY]

connector has taken

over communications

during redundant

network operation.

Check the circuit

connected to the

[PRIMARY]

connector.

An abnormality has

occurred on the circuit

connected to the

[SECONDARY]

connector during

redundant network

operation.

Check the circuit

connected to the

[SECONDARY]

connector.

Flash

Flash x2

Flash x3

LightLight

flash

FlashLight

flash

Flash x2Light

flash

SYNC Indicators Description Explanation

Synchronizing on a

Dante network

Please wait until

started has

completed or until

the unit has finished

synchronization.

It may take up to 45

seconds for

completion.

Waiting to receive

setting data

If START UP MODE

is set to REFRESH

on the R-series unit,

the input/output will

be muted until the

unit receives setting

data after it starts

up.

The unit is functioning

correctly as the word

clock master.

The unit is

operating as the

word clock master.

The unit is functioning

correctly as the word

clock slave.

The unit is

operating as the

clock slave and the

clock is

synchronized.

Light

Flash

Light

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments

Yamaha Rio1608 Owner's Manual Page 18

Comments to this Manuals

Related products and manuals for Supplementary music equipment Yamaha Rio1608