Yamaha YST-SW225 User Manual download pdf (Page 14)

CONTROLS AND THEIR FUNCTIONS

5 HIGH CUT control

Adjusts the high frequency cut off point.

Frequencies higher than the frequency selected by this

control are all cut off (and no output).

* One graduation of this control represents 10 Hz.

6 VOLUME control

Adjusts the volume level. Turn the control clockwise to

increase the volume, and counterclockwise to decrease

the volume.

7 POWER switch

Normally, set this switch to the ON position to use the

subwoofer. In this state, you can turn on the subwoofer

or turn the subwoofer into the standby mode by

pressing the STANDBY/ON button. Set this switch to

the OFF position to completely cut off the subwoofer’s

power supply from the AC line.

8 AUTO STANDBY (HIGH/LOW/OFF) switch

This switch is originally set to the OFF position. By

setting this switch to the HIGH or LOW position, the

subwoofer’s automatic power-switching function

operates as described on page 11. If you do not need

this function, leave this switch in the OFF position.

* Make sure to change the setting of this switch only

when the subwoofer is set in the standby mode by

pressing the STANDBY/ON button.

9 OUTPUT (TO SPEAKERS) terminals

Can be used for connecting to the front speakers.

Signals from the INPUT1 terminals are sent to these

terminals.

(Refer to “CONNECTIONS” for details.)

0 INPUT1 (FROM AMPLIFIER) terminals

Used to connect the subwoofer with the speaker termi-

nals of the amplifier.

(Refer to “CONNECTIONS” for details.

A INPUT2 terminals

Used to input line level signals from the amplifier.

(Refer to “CONNECTIONS” for details.)

B PHASE switch

Normally this switch is to be set to the REV (reverse)

position. However, according to your speaker systems

or the listening condition, there may be a case when

better sound quality is obtained by setting this switch

to the NORM (normal) position. Select the better

position by monitoring the sound.

C VOLTAGE SELECTOR switch

(Asia and General models only)

If the preset setting of the switch is incorrect, set the

switch to the proper voltage (110-120/220-240V) of

your area.

Consult your dealer if you are unsure of the correct

setting.

WARNING

Be sure to unplug the subwoofer before setting the

VOLTAGE SELECTOR switch correctly.

YST-SW225UB.book Page 10 Tuesday, July 27, 2004 10:25 AM

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Yamaha YST-SW225 User Manual Page 14

Comments to this Manuals

Related products and manuals for Subwoofers Yamaha YST-SW225