Yamaha DSP-AX620 EN User Manual download pdf (Page 34)

SET MENU

1 SPEAKER SET (speaker mode

settings)

Use this feature to select suitable output modes for your

speaker configuration.

Notes

• When 96-kHz sampling digital signals are input to this unit,

level adjustments in items 1B and 1D are possible, but those in

items 1A,1C and 1E are not affected.

• When 6CH INPUT is selected as the input source, level

adjustments in items 1A through 1E are not affected.

■ 1A CENTER SP (center speaker

mode)

By adding a center speaker to your speaker configuration,

the unit can provide good dialog localization for many

listeners and superior synchronization of sound and

images. The OSD shows a large, small or no center

speaker depending on how you set this item.

Choices: LRG (large), SML (small), NONE

Initial setting: LRG

LRG

Select this if you have a large center speaker. The entire

range of the center channel signal is directed to the center

speaker.

SML

Select this if you have a small center speaker. The low-

frequency signals (90 Hz and below) of the center

channel are directed to the speakers selected with “1D

LFE/BASS OUT”.

4 Press j or i once to enter the setup mode of

the selected item.

The last setting you adjusted appears on the video

monitor or on the front panel display.

Memory back-up

The memory back-up circuit prevents the stored data

from being lost even if this unit is set in the standby

mode, the power cord is disconnected from the AC

outlet, or the power supply is temporarily cut due to

power failure. However, if the power is cut for more

than one week, the settings of the SET MENU you

adjusted will return to the factory settings. If so, adjust

the items again.

1A CENTER SP

LRG

SML

NONE

1A CENTER SP

LRG

SML

NONE

4A CMPNT-V INPUT

[B] • • • • • D-TV/CBL

[A] • • • • • DVD

• When making adjustments through the front panel, turn the

multi jog knob one step to either the left or the right to enter

setup mode for the selected item.

Depending on the item, press u/d to select a sub

item.

• When making adjustments through the front panel, press SET

MENU.

5 Press j / i repeatedly to change the setting

of the item.

4B OPTICAL OUT

(1) • • • • • MD/CD-R

4A CMPNT-V INPUT

[B] • • • • • D-TV/CBL

[A] • • • • • VCR 1

• When making adjustments through the front panel, turn the

multi jog knob to change the settings.

6 Press u/d repeatedly until the current DSP

program appears or simply press one of the

DSP program group button to exit from the

SET MENU.

• When operating through the front panel, press SET MENU

repeatedly until the DSP program name appears to exit from the

SET MENU.

0107AX620(GB)_31-39_EN 1/23/1, 9:27 AM32

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 72 73

Comments to this Manuals

No comments

Yamaha DSP-AX620 EN User Manual Page 34

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Yamaha DSP-AX620 EN