Yamaha AX-10 User Manual

Natural Sound Stereo Integrated AmplifierPréampli/ampli de puissance stéréo de la série “Natural Sound”Natural Sound Stereo-VerstärkerNatural Sound In

10NOTES ABOUT THE REMOTE CONTROL TRANSMITTERBattery installationBattery replacementIf you find that the remote control transmitter must be usedcloser

English11SYMPTOMThe unit fails to turn on when the POWERswitch is pressed.No sound.The sound suddenly goes off.Only one side speaker outputs the sound

12SPECIFICATIONSMinimum RMS Output Power per Channel8 ohms, 20 Hz to 20 kHz, 0.03% THD ...70W+70W6 ohms, 20 Hz to 20 kHz, 0.06% THD ..

YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.YAMAHA CANADA MUSIC LTD. 135 MILNER AVE.,

This product complies with the radio frequency interference requirements of the Council Directive 82/499/EEC and/or87/308/EEC.Cet appareil est conform

English1. To assure the finest performance, please read this manualcarefully. Keep it in a safe place for future reference.2. Install this unit in a

4CONNECTIONS●Before attempting to make any connections to or from this unit, be sure to first switch OFF the power to this unit and to any othercompon

English5Connect the SPEAKERS terminals to your speakers with wireof the proper gauge, cut as short as possible. If theconnections are faulty, no soun

4Select the speakers to be used.*If you use two speaker systems, press both the A and Bswitches.5Play the source.6Adjust to the desired output level.7

English4 Set the tape deck to be used for recording in therecording mode.5 To monitor the sound to be recorded, select the tapedeck being used for rec

8Adjusting the BASS and TREBLEcontrolsAdjusting the BALANCE control Selecting the SPEAKER systemAdjust the balance of the output volume to the left an

English9REMOTE CONTROL TRANSMITTERThe remote control transmitter provided with this unit is designed to control all the most commonly used functions o