Yamaha TX-492RDS Owner's Manual download pdf (Page 11)

English

The automatic preset tuning begins from the frequency

currently displayed. Received stations are programmed to

A1, A2 ... A8 sequentially.

* If more than 8 stations are received, they are also

programmed to the preset station numbers on other groups

(B, C, D and E) in that order.

When the automatic preset tuning is finished

The display shows the frequency of the last preset station.

Check the contents and the number of preset stations by

following the procedure of the section “To recall a preset

station” on page 10.

To recall a preset station

Simply follow the procedure of the section “To recall a preset

station” on page 10.

A recalled station is shown by the frequency or station name

on the display.

Notes

●

If no station is received by the automatic preset tuning

search, the search finishes after “NOTHING” flashes for

about 3 seconds on the display.

●

You can replace a preset station by another FM, MW or LW

station manually by simply following the procedure of the

section “To store stations” on page 10.

●

The automatic preset tuning search will be performed

through all RDS network frequencies until stations are

stored up to E8. If the number of received stations is not

enough to be stored up to E8, the search is finished

automatically after searching all frequencies.

●

With this function, only RDS stations with sufficient signal

strength are stored automatically. If the station you want to

program is weak in signal strength, tune in to it with the MANUAL

TUNING method (in monaural) and program it by following the

procedure of the section “To store stations” on page 10.

* There may be a case that this function cannot receive a

station which could be received by the automatic tuning

method. This is because this function receives a large volume

of PI (Program Identification) data along with the station.

●

You can replace a preset station by another FM or AM

station manually by simply following the procedure of the

section “To store stations” on page 10.

●

The automatic preset tuning search will be performed

through all FM frequencies until stations are stored up to E8.

If the number of received stations is not enough to be stored

up to E8, the search is finished automatically after searching

all frequencies.

●

With this function, only FM stations with sufficient signal strength

are stored automatically. If the station you want to program is

weak in signal strength, tune in to it with the MANUAL TUNING

method (in monaural) and program it by following the procedure

of the section “To store stations” on page 10.

AUTOMATIC PRESET TUNING

You can also make use of an automatic preset tuning function for FM stations only. By this function, this unit performs automatic

tuning and stores FM stations with strong signals sequentially. Up to 40 stations are stored automatically in the same way as in the

manual preset tuning method on page 10.

* Only RDS stations can be stored by this function.

* Refer to page 13–17 for details on RDS stations.

To store stations

Press and hold for

about 3 seconds.

Flashes.

MAN’L

AUTO FM

MEMORY

MHz

AUTO

MEMO

FM/MW/LW

2 1

TX-492RDS only

TX-492RDS

TX-492

TX-492RDS only

TX-492 only

* Parts in shaded area

( ) are present on

TX-492RDS only.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Comments to this Manuals

No comments

Yamaha TX-492RDS Owner's Manual Page 11

Comments to this Manuals

Related products and manuals for Receiver Yamaha TX-492RDS