Yamaha SPM-K8 Owner's Manual download pdf (Page 5)

English

INSTALLATION PROCEDURE

E-3

Make sure to leave adequate ventilation space around the unit and follow the instructions below.

In order to secure the unit to the wall, you will need to attach the bracket to the wall first in a manner befitting the

structure and quality of the wall.

Choose a location where the wall can bear the weight of the whole unit.

Before installing the bracket, make sure of the size (see “DIMENSIONS” on the first page of this manual).

Choose a secure wall or beam to fasten the screws. Do not install them into walls made of weak

material that can easily come off, such as mortar or plywood wall panels. Loose screws could cause

the projector to fall, resulting in personal injury.

Detach the metal apparatuses from the rear left and right sides of the Sound Projector.

You need the detached screws in procedure 3. Be careful not to lose them.

INSTALLATION PROCEDURE

1 Attach the large wall mount bracket to the wall.

2 Detach the metal apparatuses from the Sound Projector.

Washer

(commercially

available)

4mm Tapping Screw (commercially available)

In order to secure the unit to the wall, drive four (or more) tapping

screws from the outside through the holes in the wall mount bracket.

Installing into a dry

wall

Installing directly

into a wall, etc.

25mm or more

Beam, etc. Dry wall

Metal

apparatus

Metal

apparatus

Installation example

1 2 3 4 5 6 7 8 9 10 ... 63 64

No comments

Yamaha SPM-K8 Owner's Manual Page 5