Yamaha HTR-3066 Setup Guide download pdf (Page 7)

6 En

The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the

distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as

volume balance and acoustic parameters, to suit your room.

Preparing for YPAO

Optimizing the speaker settings automatically (YPAO)

• During the measuring process, test tones are output at high volume. Ensure that

the test tones do not frighten small children. Also, refrain from using this function at

night when it may be a nuisance to others.

• During the measuring process, you cannot adjust the volume.

• During the measuring process, keep the room as quiet as possible.

• Do not connect headphones.

• Do not stand between the speakers and the YPAO microphone during the

measurement process (about 3 minutes).

• Move to the corner of the room or leave the room.

Connect the YPAO microphone to the

YPAO MIC jack on the front panel.

The following screen appears.

• To cancel the operation, disconnect the YPAO microphone, or

use the cursor keys to select “Exit” and press ENTER, before

starting the measurement.

To start the measurement, press SETUP.

The measurement will start in 10 seconds.

The following screen appears on the TV when

the measurement finishes.

Auto Setup

Start

Exit

Press SETUP key

to Start

VOL

[SETUP]:Start

Auto Setup

Start

Exit

Measurement

Finished

Result

3 / 2 / 0.1 ch

3.0 / 10.5 m

3.0 / +10.0 dB

OK:ENTER

VOL

Finished

VOLUME HIGH CUT

CROSSOVER/

MIN MAXMIN MAX

INFO

MEMO

PRESET

TUN NG

SCENE

OPT ON

SETUP

RETURN

VOLUME

RADIO

MUTE

ENTER

TRANSM T

RECE VER

HDMI

AUDIO

TUNER

SLEEP

USB

MODE

V AUX

MOV E MUSIC

SUR DECODE STRAIGHT

ENHANCER

1 4

MEM

RESE

UN N

RET

ADI

RAN

RECE VER

HDM

AUDI

TUNE

LEEP

MOV E MUSI

UR DECOD

TRAIGH

NHAN

The unit (front)

Place the YPAO microphone at your

listening position (same height as your

ears). We recommend the use of a

tripod as a microphone stand. You can

use the tripod screws to fix the

microphone in place.

YPAO microphone

Listening position

Ear height

Cursor keys

ENTER

Turn on the subwoofer and set

the volume to half. If the

cross-over frequency is

adjustable, set it to maximum.

SETUP

HTR-3066 only

1 2 3 4 5 6 7 8 9 10 11 12 ... 17 18

Comments to this Manuals

No comments

Yamaha HTR-3066 Setup Guide Page 7

Comments to this Manuals