Yamaha CRW3200UXZ - 24x10x40 External USB 2.0 CD-RW Drive User Manual

viTable of ContentsFeatures of the CRW3200UX Drive ... 1Names and Functions of Parts...

1Features of the CRW3200UX DriveHigh speed writing/readingThe CRW3200UX drive supports up to 24X-speed writing for CD-R discs, and up to 10X-speed wri

Features of the CRW3200UX Drive2Audio Master Quality Recording (High quality audio writing mode)Audio Master Quality Recording enables you to create h

3Names and Functions of Parts➀Disc trayHolds the disc. It is opened or closed by pressing the eject button. (P. 20)➁Manual eject holeForcibly opens th

Names and Functions of Parts4➀LINE OUT jacks (L/R)Connect audio devices such as external speakers.➁Power switch (STANDBY/ON)Turns the power on/off. (P

5Precautions on UseTo avoid trouble, such as writing errors, loss of recorded data, and malfunction of the drive, take the following precautions when

Precautions on Use6Discs that can be written onThe CRW3200UX drive can write on the following discs.For the latest information about discs previously

7Partial CAV (Constant Angular Velocity)The CLV (Constant Linear Velocity) method is generally used to write data on a CD-R disc. In writing using the

Precautions on Use8The CRW3200UX drive is designed to operate in the following computer environment. If your computer does not meet these requirements

9• USB port (USB 2.0 compatible)A USB port is required to connect the CRW3200UX drive to the computer. The CRW3200UX drive needs to be connected to th

(DECLARATION OF CONFORMITY PROCEDURE)Responsible Party: Yamaha Electronics Corporation, USA.Address: 6660 Orangethorpe AvenueBuena Park, CA 90620Telep

Precautions on Use10USB cableThe USB standard for maximum length of cable between devices is five meters.Operating systemWindows 98 Second Edition, Wi

11Preparing the CRW3200UX DriveThe serial number is printed on the label on the bottom of your CRW3200UX drive. When you have a question about the dri

Preparing the CRW3200UX Drive12Place the CRW3200UX drive horizontally.1Remove all USB devices connected to the computer, and turn on the computer.2Be

133Connect the included USB cable to the CRW3200UX drive.The included USB cable has two types of plugs: Series A plug and Series B plug.Insert the Ser

Preparing the CRW3200UX Drive145Connect the included power cable to the AC adapter (➀). Connect the other end of the power cable to the wall socket (➁

156Turn on the power switch of the CRW3200UX drive.When turning on the CRW3200UX drive, be sure that LED on the front panel blinks blue and then light

Preparing the CRW3200UX Drive16• The CRW3200UX drive needs to be connected to the USB port on the computer. The drive connected to the computer via a

172Check that the following icons are shown.a:“YAMAHA CRW3200E” in the “CDROM” item. (Fig.1)b:“USB CD-ROM” in the “Storage device” item. (Fig.2)c:“USB

Preparing the CRW3200UX Drive18For Windows XP1Select Start on the task bar, then Control Panel, System, Hardware tab, and Device Manager. The Device M

19Connecting/Disconnecting the CRW3200UX Drive to/from the ComputerThe CRW3200UX drive can be connected/disconnected whether the computer and the driv

CAUTION - VISIBLE AND / OR INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM.VARNING - SYNLIG OCH / ELLER OSYNLIG LASERSTRÅLNING NÄR DENNADE

20Loading/Ejecting a DiscPrior to the operation, check that the CRW3200UX drive is turned on.1Open the disc tray by pressing the eject button.2Place t

21Manually Ejecting a DiscIf the disc tray fails to open for some reason, such as a power failure, follow the steps below to remove the disc from the

22Troubleshooting1The CRW3200UX drive is not turned on when the power switch is ON.(The front panel LED does not light.)●Are the AC adapter and the po

23●Is the USB interface card recognized properly by the operating system?Follow the documentation that comes with the USB interface card or the comput

Troubleshooting245The disc is ejected without order (or it comes out spontaneously).●Is the disc set properly (horizontally) on the disc tray?Set the

25●Does the LED on the front panel of the CRW3200UX drive light correctly when a disc is inserted?When a disc is inserted, the LED will blink blue for

Troubleshooting263Start “Windows Media Player.” In the menu bar, select Tools, Options and CD Audio tab.4Uncheck the “Digital playback” in the “Playba

278No data can be read from any CDs, a disc is ejected spontaneously, or the LED remains purple when a disc is inserted. (The LED does not change from

Troubleshooting2810Other problems●Isn’t more than one CD writing software installed in your computer?Installing more than one CD writing software in a

29FirmwareFirmware refers to the operating software designed for your CD-R/RW drive. It is stored in the drive’s flash memory so that it can be rewrit

30CRW3200UX Drive Specifications*1includes multisession*2proper disc required*3proper application software required*4proper application software may b

31Data Capacity 700 MB (79 min.)650 MB (74 min.)550 MB (63 min.)Maximum Recording Time in Audio Master Quality Recording68 min. (with a 700 MB disc)63

CRW3200UX Drive Specifications32AC adapter (AD-301205) Rated Input Voltage 100 – 240 V ACRated Input Current 1.0 A or lessRated Output Voltage +5 V, +

33Safety/EMC ComplianceThe CRW3200UX drive conforms to the following specifications.Note that the specifications of the CRW3200UX drive are subject to

34Technical NotesCD-R/RW drives are equipped with a buffer memory, which temporarily stores data that is being transferred. When the buffer memory bec

35Disc-at-Once (DAO)This method is used to write all data onto a disc in one operation. It writes multiple pieces of data without placing a space betw

Technical Notes36Packet WritingThis method is used to record data onto a disc on a file-by-file basis. This method divides a track into small segments

If you have any questions, please contact the store of purchase or your nearest Yamaha dealer listed below. Contact Yamaha Corporation Japan from outs

iEnglishOWNER’S MANUAL

iiSAFETY PRECAUTIONSPLEASE READ THE FOLLOWING WARNINGS AND CAUTIONS CAREFULLY TO PREVENT PERSONAL INJURY AND DAMAGE TO THE DEVICE.These precautions ex

iii●Be sure that the computer is electrically grounded to avoid the risk of electrical shock.●Prior to cleaning the drive, always unplug the computer

iv●Use soft, dry cloths to wipe the device. Do not use benzene, paint thinner, detergents, or chemically treated wiped cloths, and do not place vinyl,

vWARRANTYYAMAHA AND ITS SUPPLIERS ACCEPT NO LIABILITY FOR ANY PROBLEMS THAT OCCUR AS A RESULT OF ANY OPERATIONS CARRIED OUT OTHER THAN THOSE STATED IN