Yamaha SY85 Owner's Manual download pdf (Page 31)

30 PERFORMANCE EDIT MODE / QUICK EDIT

Coff (Filter cutoff frequency)

Range: -127 … +127

Controls: [CS6], [-1] [+1], Dial

Modifies the filter cutoff frequency (this corresponds to the voice filter

“CutOff” parameter — see page 65). Plus (+) values increase the cutoff fre-

quency while minus (-) values lower the cutoff frequency. This parameter

cannot be used if the filter is set to “Thru”. In this case “----” appears in place

of the parameter value.

No matter how much offset is applied, the minimum and maximum cutoff

frequency values cannot be exceeded.

Reso (Filter resonance)

Range: -99 … +99

Controls: [CS7], [-1] [+1], Dial

Modifies the height of the filter’s resonant peak (this corresponds to the

filter “Resonance” parameter — see page 68). Plus (+) values increase reso-

nance while minus (-) values reduce resonance. This parameter cannot be used

if the filter is

not set to “LPF”. In this case “---” appears in place of the pa-

rameter value.

No matter how much offset is applied, the minimum and maximum reso-

nance values cannot be exceeded.

Vel (Velocity sensitivity)

Range: -127 ... +127

Controls: [CS8], [-1] [+1], Dial

Modifies the filter velocity sensitivity setting (see page 72). Plus “+” set-

tings increase sensitivity while minus “-” settings reduce sensitivity.

No matter how much offset is applied, the minimum and maximum velocity

values cannot be exceeded.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 330 331

No comments

Yamaha SY85 Owner's Manual Page 31