Yamaha PLG150DX Owner's Manual download pdf (Page 21)

Installing and Starting the Plug-in Editor Software (Windows 95/98)

Starting the DX Simulator

1 Start XGworks (or XGworks lite).

2 Click the “Plug-in” menu and select “DX

Simulator.”

Alternately, press Alt + P, then D, and ENTER. The

“Select DX Part” dialog box appears.

3 Set the desired Part number and click “OK.”

The DX Simulator window appears.

If the PLG150-DX has been properly installed and all computer/MIDI connections have been

properly made, operating the DX Simulator should directly affect the PLG150-DX. For details

on using the DX Simulator, refer to the on-line help ﬁle that is included with the software.

● To use the DX Simulator, your copy of XGworks must be version 1.05 or later.

You can download the proper update of XGworks or XGworks lite from the Yamaha website

(http://www.yamaha.co.uk).

● When using a Modular Synthesis Plug-in System “mother” device, the Part assignment depends on

which mode is used — Voice or Performance — and also on whether the PLG150-DX board is

installed/assigned to PLG1 or PLG2, as described below.

When using the Voice mode:

Depending on which slot the PLG150-DX board has been installed to, press PLG1 or PLG2,

then set the Part to “1” (no matter what the PLG1 or PLG2 assignment is).

When using the Performance (Multi) mode:

If the PLG150-DX board is assigned to PLG1, set the Part to “16.”

If the PLG150-DX board is assigned to PLG2, set the Part to “15.”

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 67 68

No comments

Yamaha PLG150DX Owner's Manual Page 21