Yamaha GW50 Specifications download pdf (Page 19)

PANEL CONTROLS AND TERMINALS

LCD Display

Note: Other display indications are explained later in

the relevant sections of the manual.

ASSIGNABLE BLOCK AND PEDAL SWITCH FUNCTIONS

ABOUT THE ASSIGNABLE BLOCK LED INDICATORS

The following illustration shows how and under what conditions

the ASSIGNABLE block LEDs are lit.

ASSIGNABLE Block Controls

eASSIGNABLE Block Type Switch

• For selecting various control functions for the

ASSIGNABLE Block Pedal Switch and the

other Pedal Switches including effect program

selection, turning individual effect blocks (or

groups) on and off, MIN/MAX Volume, Auto

Volume, Backing Control and Chord Recall.

rASSIGNABLE Block Pedal Switch

• For performing various control functions,

including effect program selection, turning

individual effect blocks (or groups) on and off,

MIN/MAX Volume, Auto Volume, Backing

Control and Chord Recall. (The arrow mark

printed with the button name at the bottom left

indicates the direction in which the appropriate

buttons can be found.)

For more information on the ASSIGNABLE

Block Pedal Switch and the other Pedal

Switches, see the section “ASSIGNABLE

BLOCK AND PEDAL SWITCH FUNCTIONS”

on pages 10-14.

1 INPUT PEAK indicator — for monitoring the input signal

level (lights continuously when level is too high).

2 BANK/MEMORY indicator — displays the memory bank

and program numbers. When selecting songs, this briefly

displays the song number. In the Tuner function, this displays

the string number (when an open string is played) and/or the

name of the note played (for example, 6E).

3 Sharp indicator — This flashes when a sharp note (for

example, G



or C



) is played in the tuner function.

4 6 — This cursor arrow points to a value in the display that can

currently be changed by using the [–]/[+] buttons.

When [MANUAL] or [MEMORY] are pressed (calling up

the Effect mode display), the arrow automatically disappears

from the display. You can use [6 CURSOR] to move the

cursor arrow back “in” the display. When [SONG/PAT-

TERN] is pressed (calling up the Backing mode display), the

cursor automatically appears in the display.

LED status

: Lit

: Flashing

: Off

Indicates bank/

program number

can be selected.

Indicates maximum

volume.

Indicates minimum

volume.

Indicates maximum

volume.

Indicates mute

or fade-in condition.

(active).

Off

(not active).

Off

(not active).

MEMORY ( BANK)/ x2 ON•OFF

MIN/MAX VOLUME

AUTO VOLUME ( MUTE

FADE IN)

BACKING CONTROL

CHORD RECALL

Note: The MEMORY LED

above will still be lit or flashing,

even if either of these is on.

When [MANUAL] is pressed

When [MEMORY] is pressed

When [SONG/PATTERN] is pressed

When [SHIFT] + [SONG REC]

are

ressed

(active).

Off

(not active).

Off

(not active).

the MEMORY LED here flashes,

and no other LED in this block is lit.

only the MEMORY LED here is lit or flashing.

only the BACKING CONTROL LED is lit.

only the CHORD RECALL LED is lit.

Indicates effect

(or effect group) can

be turned on/off.

Off

(not active).

Indicates Triggered

Run standby condition.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 165 166

Comments to this Manuals

No comments

Yamaha GW50 Specifications Page 19

Comments to this Manuals

Related products and manuals for Musical Instruments Yamaha GW50