Yamaha MY8-TD Owner's Manual download pdf (Page 9)

Rear Panel

DA824—Owner’s Manual

Rear Panel

COM port

This port is for updating the DA824’s internal ﬁrmware and is not used in normal oper-

ation.

WORD CLOCK THRU connector

This BNC connector transmits the wordclock signal received at the WORD CLOCK IN.

WORD CLOCK 75

Ω

ON/OFF switch

This switch is used to terminate the wordclock signal received at the WORD CLOCK

IN. See “Wordclocks” on page 8 for more information.

WORD CLOCK IN connector

This BNC connector is used to connect an external wordclock source. Normally, the

DA824 locks to a wordclock signal derived from the SLOT digital audio inputs, but

when a usable wordclock signal is present at the WORD CLOCK IN connector, this is

used instead. See “Wordclocks” on page 8 for more information.

OUTPUT (BAL) connectors

These male XLR-3-32 type connectors and 1/4" phone jack (TRS) connectors are the

analog outputs for each channel. Both types of connector are electronically balanced.

XLR connectors are wired as follows: pin-1 ground, pin-2 hot (+), and pin-3 cold (–).

When using both the XLR and phone jack output of a channel at the same time, ensure

that the total load is greater than 600

Ω

Power cable

This power cable is used to connect the DA824 to an AC outlet. See “Connecting the

Power Cord” on page 1 for more information.

SLOT

This slot is for use with optional mini YGDAI cards, which offer various digital input

options. See “Digital I/O Cards” on page 4 for more information.

SLOT

COM

THRU

75Ω IN

OFF

WORD CLOCK

DA CONVERTER

MODEL DA824

8 2314567

OUTPUT

(BAL)

1 52 4

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 18 19

Comments to this Manuals

No comments

Yamaha MY8-TD Owner's Manual Page 9

Comments to this Manuals

Related products and manuals for Musical Equipment Yamaha MY8-TD