Yamaha PLG150-PC Owner's Manual download pdf (Page 18)

Selecting/Editing the PF System Parameters

(XG Plug-in System)

The parameters that apply to the entire system of the PLG150-PF are included in the Utility mode

menu of the XG tone generator.

The example displays used in the following explanations are all taken from the MU128.

1 Press the [UTIL] button.

The Utility mode menu appears.

2 Select the “PLUGIN” menu.

Use the [SELECT >] button to highlight “PLUGIN,” then press the [ENTER] button.

3 Select the PLG150-PF board.

If the PLG150-PF board is the only one installed, “PLG150-PF” is already displayed and can be

selected by pressing the [ENTER] button. If additional boards have been installed to the tone

generator, you may need to select “PLG150-PF.” To do this, ﬁrst use the [SELECT </>] but-

tons, then press [ENTER].

The System parameter menu for the PLG150-PF appears.

4 Select the desired parameter.

Use the [SELECT </>] buttons.

5 Adjust the value or change the setting for the selected parameter.

Use the [VALUE +/-] buttons.

6 Return to the main Play display.

Press the [EXIT] button several times, or press the [PLAY] button once.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 47 48

No comments

Yamaha PLG150-PC Owner's Manual Page 18