Yamaha RAIDER SCL Owner's Manual download pdf (Page 23)

INSTRUMENT AND CONTROL FUNCTIONS

3-6

3

Right

EAU12400

Dimmer switch “ / ”

Set this switch to “” for the high

beam and to “” for the low beam.

EAU12430

Turn signal switch “ / ”

To signal a right-hand turn, push this

switch to “”. To signal a left-hand

turn, push this switch to “”. When re-

leased, the switch returns to the center

position.

Since this model is equipped with a

self-canceling system, the turn signal

lights will self-cancel after the vehicle

has traveled both about 150 m (490 ft)

and for approximately 15 seconds.

However, the turn signal lights can also

be canceled manually by pushing the

switch in after it has returned to the cen-

ter position.

NOTE:

The self-canceling system only oper-

ates when the vehicle is moving, so that

the turn signal lights will not self-cancel

while you are stopped at an intersec-

tion.

EAU12500

Horn switch “”

Press this switch to sound the horn.

EAU12660

Engine stop switch “ / ”

Set this switch to “” before starting

the engine. Set this switch to “” to

stop the engine in case of an emergen-

cy, such as when the vehicle overturns

or when the throttle cable is stuck.

EAU38331

Light switch (for optional lights)

“”

This model can be equipped with op-

tional lights available at a Yamaha

dealer.

Push this switch to the left to turn the

optional lights on and to the right to turn

them off.

CAUTION:

ECA15321

Do not install a bulb which exceeds

12 V, 35 W in either light, otherwise

the headlight fuse may blow or the

battery may discharge.

EAU12710

Start switch “”

Push this switch to crank the engine

with the starter.

CAUTION:

ECA10050

See page 5-1 for starting instruc-

tions prior to starting the engine.

1. Engine stop switch “ / ”

2. Light switch (for optional lights) “”

3. Start switch “”

U29S10E0.book Page 6 Friday, May 18, 2007 1:53 PM

1 ... 22 23 24 ... 96

Comments to this Manuals

No comments