Yamaha 2003 Virago 250 Owner's Manual download pdf (Page 33)

PRE-OPERATION CHECKS

4-2

NOTE:

Pre-operation checks should be made each time the motorcycle is used. Such an inspection can be accomplished in a very

short time; and the added safety it assures is more than worth the time involved.

EWA00033

WARNING

If any item in the Pre-operation check list is not working properly, have it inspected and repaired before operating

the motorcycle.

Drive chain

• Check chain slack.

• Adjust if necessary.

• Check chain condition.

• Lubricate if necessary.

6-22–6-23

Wheels and tires

• Check for damage.

• Check tire condition and tread depth.

• Check air pressure.

• Correct if necessary.

6-14–6-16

Brake and shift pedals

• Make sure that operation is smooth.

• Lubricate pedal pivoting points if necessary.

6-26

Brake and clutch levers

• Make sure that operation is smooth.

• Lubricate lever pivoting points if necessary.

6-26

Sidestand

• Make sure that operation is smooth.

• Lubricate pivot if necessary.

6-27

Chassis fasteners

• Make sure that all nuts, bolts and screws are properly tightened.

• Tighten if necessary.

—

Instruments, lights, signals

and switches

• Check operation.

• Correct if necessary.

—

Sidestand switch

• Check operation of ignition circuit cut-off system.

• If system is defective, have Yamaha dealer check vehicle.

3-10–3-11

Battery

• Check fluid level.

• Fill with distilled water if necessary.

6-29–6-30

ITEM CHECKS PAGE

E_U2UJ1B.book Page 2 Wednesday, May 29, 2002 1:56 PM

1 ... 32 33 34 ... 97

Comments to this Manuals

No comments

Yamaha 2003 Virago 250 Owner's Manual Page 33

Comments to this Manuals

Related products and manuals for Motorcycles Yamaha 2003 Virago 250