Yamaha CS6X Owner's Manual download pdf (Page 24)

@ EQ settings

Click on the text box and select the EQ type. With the “EQ L/H” and “P.EQ” types, you can

adjust some EQ parameters using the square marks in the graphs. Drag one of the square

marks horizontally to adjust the Element’s “EQ Low Frequency,” and vertically to adjust its

“EQ Low Gain.” Drag the other square mark horizontally to adjust the Element’s “EQ High

Frequency” (or “EQ Resonance” if the P.EQ type has been chosen) and vertically to adjust

its “EQ High Gain.”

n Sometimes, not all the square marks are visible as they may be layered on top of each other at the

same position. In which case, click the visible square mark and drag it away to reveal the next

square mark.

n To set these values directly, select the “OSCILLATOR” tab of the DRUM KEY DETAIL Dialog.

n All graphs are disabled if the oscillator source is set to “VOICE.”

# LEVEL control

Use this knob to set the level of the Element.

$ PAN controls

Use the “PAN” knob to set the stereo position of the Element. Use the “RNDM PAN” knob

to set the Element’s “Random Pan” depth. Use the “ALTER PAN” knob to set the “Alternate

Pan” depth.

n The “RNDM PAN” and “ALTER PAN” knobs are disabled if the oscillator source is set to “VOICE.”

% Output Assignment selector

Click on the text box and select the output(s) to which the Element will be sent.

^ Insertion Effect switches

Click the [EF 1] switch to pass the signal through Insertion Effect 1. Click [EF 2] to pass it

through Insertion Effect 2. Click [THRU] to bypass the Insertion Effects.

& REVERB & CHORUS controls

Use the “REVERB” and “CHORUS” knobs to set the level of the signal from Insertion Effect

1/2 (or the by-passed signal) sent to the Reverb/Chorus unit.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30

No comments

Yamaha CS6X Owner's Manual Page 24