Yamaha MX-800 User's Guide download pdf (Page 58)

2-26

Chapter 2: BIOS information

2.6 Boot Menu

CPU Fan Speed [xxxxRPM] or [N/A]

Chassis Fan Speed [xxxxRPM] or [N/A]

The onboard hardware monitor automatically detects and displays the CPU,

chassis, and power fan speeds in rotations per minute (RPM). If any of the fans is

not connected to the motherboard, the specific field shows N/A.

VCORE Voltage, +3.3V Voltage, +5V Voltage, +12V Voltage

The onboard hardware monitor automatically detects the voltage output through

the onboard voltage regulators.

If any of the monitored items is out of range, the following error message

appears: “Hardware Monitor found an error. Enter Power setup menu for

details”. You will then be prompted to “Press F1 to continue or DEL to enter

SETUP”.

Boot Sequence

The Boot menu allows you to select among the four possible types of boot devices

listed using the up and down arrow keys. By using the <+> or <Space> key, you

can promote devices and by using the <-> key, you can demote devices.

Promotion or demotion of devices alters the priority which the system uses to

search for a boot device on system power up. Configuration fields include

Removable Devices, IDE Hard Drive, ATAPI CD-ROM, and Other Boot Device.

Removable Device [Legacy Floppy]

Configuration options: [Disabled] [Legacy Floppy] [LS-120] [ZIP] [ATAPIMO]

[USB FDD] [USB ZIP]

IDE Hard Drive

This field allows you to select which IDE hard disk drive to use in the boot

sequence. Pressing [Enter] will show the product IDs of all connected IDE hard

disk drives.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 64

No comments

Yamaha MX-800 User's Guide Page 58