Yamaha YHT-380 Owner's Manual download pdf (Page 22)

ADDITIONALINFORMATION

If there is any problem with the system, check the following items. If you cannot solve a problem with the

following remedies, or if the problem is not listed below, turn off and unplug the system, and then consult your

nearest authorized Yamaha dealer or Service Center.

page

Power turns on but The power cable may be connected Make sure the power cable is plugged into

immediately shuts off. improperly, the outlet firmly.

A speaker cable may be shorted. Make sure all speaker cables are connected

properly.

This system may have received a Set this system to standby mode, and then

strong electrical shock, such as from a disconnect the power cable. Wait tk_r about

lightening bolt or excessive static 3(1 seconds, connect the power cable, and

electricity, then turn the system on again.

The speakers make no The volume may be set to minimum Adjust the volume level.

sound, level. 12, 19

The mute function may be activated. Cancel the mute function. 12

The input source or input setting may Select the correct input source or input 12

be incorrect, setting.

The cables may be connected Make sure all cables are connected

improperly, properly.

"HDMI AUDIO" in the setup menu is Set "HDMI AUDIO" in the setup menu to 19

set to "TV". "AMP".

Sound is too low on The cables may be connected Make sure all cables are connected

one side. improperly, properly. 10

Speaker channels You may be listening to stereo sounds Press a surround mode button to enable the

other than the front without surround mode. sound field effect.

ones make no sound.

"SUR. LEVEL" in the setup menu is Adjust "SUR. LEVEL" in the setup menu. 19

set to minimum level.

The subwoofer makes The volume of the subwoofer channel Adjust the volume level of the subwoofer. 7, 19

no sound, may be set to minimum level.

The source does not contain low-

frequency signals.

The volume level You turned off the system when the

decreases without any volume level was over 70.

operation.

The volume level is automatically set to 70

the next time you turn on the system to

protect the speakers.

Sound is poor (noisy). A speaker cable may be shorted.

Make sure all cables are connected

properly.

This system does not

operate properly.

This system may receive a strong

electrical shock, such as from a

lightening bolt or excessive static

electricity, or drop in power supply.

Set this system to standby mode, and then

disconnect the power cable. Wait tk_rabout

3(1 seconds, connect the power cable, and

then turn on this system.

A digital or high-

frequency equipment

produces noises.

The system may be placed close to

digital equipment or high-frequency

equipment.

Place this system farther away from such

equipment.

22 E,

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28 29

Comments to this Manuals

No comments

Yamaha YHT-380 Owner's Manual Page 22

Comments to this Manuals

Related products and manuals for LED TVs Yamaha YHT-380