Yamaha NS M325 Owner's Manual download pdf (Page 3)

E-3

English

SPEAKERS

–

CONNECTIONS TO YOUR AMPLIFIER

Amplifier or

Receiver

NS-M325

Before making connections, make sure that the amplifier is switched off.

■ CONNECTIONS

• Connect the screw-type input terminals at the rear of the

speakers to the speaker output terminals of the amplifier

(or receiver) with the speaker cable.

• Connect the (+) terminals on the amplifier (or receiver)

and the speakers using one side of the cable. Connect

the (–) terminals on both components using the other

side of the cable.

• Connect one speaker to the left (marked L) terminals of

your amplifier, and another speaker to the right (marked

R) terminals, making sure not to reverse the polarity

(+, –). If one speaker is connected with reversed polarity,

the sound will be unnatural and lack bass.

How to connect:

1 Loosen the knob.

2 Remove the insulation coating at the extremity of each

speaker cable by twisting the coating off.

3 Insert the bare wire.

4 Tighten the knob and secure the cables.

Test the firmness of the connection by pulling lightly on

the cables at the terminal.

Note:

Do not let the bare speaker wires touch each other as

this could damage the speaker or the amplifier, or both

of them.

Loosen

Black (–)

When using a banana plug

1 Remove the cover by pulling it toward you.

2 Tighten the terminal knob.

3 Simply insert the banana plug into the terminal.

Banana plug

Red (+)

NS-M325

Speakers output

terminals of the

amplifier (or

receiver)

(R) (L)

Tighten

NS-M325-EN 6/20/05, 1:32 AM3

1 2 3 4

Comments to this Manuals

No comments

Yamaha NS M325 Owner's Manual Page 3

Comments to this Manuals

Related products and manuals for LCD TVs Yamaha NS M325