Yamaha HTR-5940 User Manual Page 2

  • Download
  • Add to my manuals
  • Print
  • Page
    / 12
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 1
Turn on the power while pressing these keys.
これらのキーを同時に押しながら、パワーオンする。
• Starting DIAG
Press the “STANDBY/ON” key while simultaneously
pressing those two keys of the main unit as indicated in the
figure below.
● ダイアグの起動
本体の下図に示すキーを同時に押しながらSTANDBY/ON”
キーを押すと、ダイアグが起動します。
Starting DIAG in the protection cancel
mode
If the protection function works and causes hindrance to
trouble diagnosis, cancel the protection function as
described below, and it will be possible to enter the DIAG
mode. (The protection functions other than the excess
current detect function will be disabled.)
Press the “STANDBY/ON” key while simultaneously
pressing those two keys indicated in the figure above. At
this time, keep pressing those two keys for 3 seconds or
longer.
In this mode, the “SLEEP” segment of the FL display of the
main unit flashes to indicate that the mode is DIAG mode
with the protection functions disabled.
● プロテクション解除モードでの起動
プロテクションが動作することにより、故障箇所の診断に支障を
きたすような場合は、次の方法によりプロテクションを解除した
状態でダイアグモードに入ることができます。(過電流検出以外の
プロテクション動作を解除する)
上図のキーを同時に押しながら“STANDBY/ON”キーを押しま
す。このとき、上図のキーを3秒以上押し続けてください。
このモードでは本体FLの“SLEEP”セグメントが点滅し、プロテ
クションを解除した状態でのダイアグモードであることを知らせ
ます。
CAUTION!
Using this product with the protection function disabled
may cause damage to itself. Use special care for this point
when using this mode.
注意!
プロテクションを解除した状態でのダイアグモードは、危険な
状態でもプロテクションが作動しないため、動作させると、機
器を破壊することがあります。このモードを使用する場合は十
分注意してください。
● ダイアグの解除
ダイアグを解除する前に、ダイアグメニューN o . 9
FACTORY PRESET (メモリーの初期化禁止/またはメモ
リーの初期化)の設定をします。
ユーザーメモリーを保持したい場合は、必ずPRESET
INHIBITED(メモリー初期化禁止)を選択してください。
本体の
STANDBY/ON
キーを押し、パワーオフにします。
Keys of main unit / 本体キー
• Canceling DIAG
1 Before canceling DIAG, execute setting for FACTORY
PRESET of DIAG menu No.9 (Memory initialization
inhibited or Memory initialized).
* In order to keep the user memory stored, be sure to
select PRESET INHIBITED (Memory initialization
inhibited).
2 Turn off the power by pressing the “STANDBY/ON”
key of the main unit.
Page view 1
1 2 3 4 5 6 7 ... 11 12

Comments to this Manuals

No comments