Yamaha UD-Stomp Owner's Manual

10INPUTEFFECTEFFECTSENDRETURNLROUTPUTL/MONO RInstrumentGuitar Amplifier, etc.UD-StompINPUTINPUTLROUTPUTL/MONO RUD-StompInstru-mentDistortion, etc.Conn

11Connections Connecting an Expression (EXP)PedalA foot controller (expression pedal), such as theYamaha FC-7 (optional) connected to the UD-Stomp’s

12Using the UD-StompThe UD-Stomp is an effects processor that is equipped with eight identical delay circuits.It provides you with the power and freed

13687EFFECT BANDSelecting an Effect BandLet’s first select a delay circuit and set its param-eters.The [EFFECT BAND 1-8] buttons are used to switchthe

14LRPANLRPANLRPANUsing the UD-StompSetting the FeedbackUp to this point we have set the delay time so asingle delay sound is produced 250msec after th

15240msec360msec360msec360msecTIMEOriginalSoundDelay sound from Effect Band 1Delay sound fromEffect Band 2OriginalSoundDelay sound fromEffect Band 1De

16BAND 1BAND 2696msec696msecBAND 1-21430msecDelay Output Delay OutputDelay Output Delay OutputBAND 1IN1BAND 44BAND 7BAND 8IN8BAND 55BAND 2BAND 3IN3BAN

17Also, once a Group has been set, you can accessany of the outputs from the individual delay unitsthat make up the group.23.Confirm that Effect Bands

18Two modulation waves (sine plus one more) canbe used at the same time. Press the [EFFECTBAND 2] button to switch Effect Band 2 ON,and you’ll hear th

19Selecting and Saving Patches Try Selecting Another PatchThe UD-Stomp holds a total of 180 patch programs(patch) in its internal memory.The 180 patc

2ADVARSEL!Lithiumbatteri—Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af samme fabrikat og type.Levér det brugte batte

20● Using the Foot Switch and the BankSwitch• Press a foot switch (1-3) to select the corre-sponding patch number 1-3 in the currently se-lected group

21Selecting and Saving Patches Create and Store a PatchOriginal settings can be stored in the USER AREA(011-933). Try creating an original patch and

22Convenient FunctionsHere are some convenient functions that make using the UD-Stomp easier.● Use the Footswitch to set the DelayTime (Tap Tempo)With

23* If you want to stop loop sample playback temporarily, stepon the BANK Footswitch to enter the Bypass Mode. To restartloop sample playback, press t

24External Control Settings• Fb1 - Fb8 : FEEDBACK• tP1 - tP8 : TAP• SP1 - SP8 : SPEED• dP1 - dP8 : DEPTH• Pn1 - Pn8 : PAN• LE1 - LE8 : LEVEL• EF.L : E

25Utility ModeThe Utility Mode is used for settings that cover the overall system of the UD-Stomp such asthe foot switch, MIDI, external control, EXP.

26 External Control SettingsJust as described in the “External Control Settings”section on page 24, these settings can be used tocontrol each of the

27Utility Mode● Set the External ControllerPress the [BAND 3] button and use the [UP]/[DOWN]buttons to select the type of controller (EP, 1-31,64-95).

28Error MessagesIf an error occurs during operation, one of the following error message numbers will appear inthe display. Stop operation of the devic

29SpecificationsDigital Section•8-Band Delay (Delay Time: 696msec max per band)• Delay Time, Loop Filter (High Cut, Low Cut), Feed-back, Tap, Pan, Lev

3WARNING- When using any electrical or electronic prod-uct, basic precautions should always be followed. These precau-tions include, but are not limit

30MIDI Implementation Chart YAMAHA [ Modulation Delay] Date:14-Dec-2001 Model UD stomp MIDI Implementation Char

31MIDI Implementation Chart: : : : :: : :

Printed in TaiwanV839860

4Thank you for purchasing the Yamaha UD-Stomp.To fully understand the functions and to obtain maxi-mum life from this device, please read this Owner’s

5About the Backup BatteryA backup battery (lithium battery) is used to keep internal data (settings) from being lost, even whenthe power cord is unplu

6qwterNomenclature Top PanelDisplay & Main Section Controller SectionFootswitch Sectione Utility Button (UTILITY)Enters the Utility Mode. (→ page

7Nomenclature● Controller Sectiony ASSIGNABLE CONTROLYou can assign one of the functions of Effect Pa-rameter Controllers o - @0 to this knob. (→ page

8@2 @3When the knob is rotated fully to the left (oFF) thefilter is OFF. Rotate the knob to the right to lowerthe cut off frequency.!3 FEEDBACK Contro

9@4 @5 @6 @7 @8 @9 #0 #3#2#1Nomenclature Rear Panel@4 Power Switch (STAND-BY ON/OFF)Power switch for the main unit.* To protect the speakers, set the