Yamaha AT-800 Owner's Manual download pdf (Page 4)

2 En

Make sure the package contains the following items.

Make sure that you leave adequate ventilation space around the unit and follow the instructions below. Be sure to use the

specified mounting screws for installation to prevent the audio unit from falling. Illustrations for each step use the ISX-800.

1 Use the template on the back cover to mark screw positions on the wall with a pin.

Remove the template, and then attach commercially-available tapping screws

(ø6

(1/4")) in the marked positions.

To prevent the wall surface from being damaged, drill pilot holes, then attach the screws.

Notes

• Choose a secure wall or beam to fasten the screws. Do not install them into walls made of weak material that can easily come off,

such as mortar or plywood wall panels. Loose screws could cause the audio unit to fall, resulting in personal injury.

• Do not use screws shorter than the specified length, nails, or double-sided adhesive tape. Otherwise, the audio unit may fall due

to wear or vibration, possibly resulting in personal injury.

PACKAGE CONTENTS

ASSEMBLING PROCEDURE

Attaching the screws to the wall

Attachment (AT-800)

Have the following items ready in addition:

• Commercially available tapping screws (x4)

(

6 mm (1/4") , 31 mm (1-1/4") or more in

length, 7 mm (1/4") or more in screw head

diameter)

• M4 screws that came with the audio unit (x4)

(If the screws are being used to mount the

audio unit on a dedicated stand, remove the

screws.)

• Phillips(+) screwdriver

(Do not use electric tools.)

Weight: 1.3 kg (2.9 lbs)

Safety wire (x2)

Length: 300 mm

(11-3/4")

Washer (x2)

(for M6, 16 mm (5/8")

of outer diameter)

7 mm (1/4") or more

25 mm (1") or more

200 mm (7-7/8")

6mm

(1/4")

1 2 3 4 5 6 7

No comments

Yamaha AT-800 Owner's Manual Page 4