Yamaha CRW-F1DX Owner's Manual download pdf (Page 36)

Preparing the CRW-F1DX Drive (Macintosh – USB)

• The CRW-F1DX drive is required to be connected to the USB port on the

computer. The drive connected to the computer via a USB hub or a USB

keyboard may not operate properly.

• When the CRW-F1DX drive is connected to a Macintosh standard USB port,

the drive operates with USB 1.1 specifications. (P. 9)

Check recognition of the CRW-F1DX drive.

After connecting the CRW-F1DX drive to the computer, follow the steps

below to check that the drive is recognized by the computer properly.

For Mac OS 9.1 and 9.2

Select the Apple menu in the menu bar, then Apple System Profiler and

Device and Volume tab.

Check that “CRW-F1DX” is shown in the “USB” item.

• If the “USB” item is not shown, the USB interface of the computer is not

recognized by the Mac OS. Contact the manufacturer of the computer.

• If “CRW-F1DX” is not shown even with the “USB” item shown, the CRW-

F1DX drive is not recognized by the Mac OS. In such a case, contact the store of

purchase or your nearest Yamaha dealer (listed at the back of this manual).

• The USB version in Mac OS that supports the CRW-F1DX drive is 1.2 or later.

• The extension files that support the CRW-F1DX drive are required to mount

and read the disc even if the drive is recognized by Apple System Profiler. The

extension files come with the CD writing software. For details, refer to the

instruction for the CD writing software.

Note

“CRW-F1DX”

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 73 74

No comments

Yamaha CRW-F1DX Owner's Manual Page 36