Yamaha T-50 Service Manual download pdf (Page 68)

INSP

ADJ

3-29

FUSE INSPECTION

1. Remove:

8 Battery box cover

Refer to “COVER AND PANEL” section.

2. Remove:

8 Fuse 1

3. Inspect:

8 Fuse 1

defective→Replace

***************************************

Blown fuse procedure steps:

8 Turn off ignition and the circuit.

8 Install a new fuse of proper amperage.

8 Turn on switches to verify operation of elec-

trical device.

8 If fuse blows immediately again, check cir-

cuit in question.

***************************************

Never use a fuse with an amperage rating other

than that specified. Improvising or using a fuse

with the wrong amperage rat-ing may cause

extensive damage to the electrical system,

cause the lighting and ignition systems to mal-

function and could possibly cause a fire.

Description Amperage Quantity

Main 7A 1

4. Install:

8 Fuse

8 Battery box cover

4. Inspect:

8 Battery terminal

Dirty terminal→Clean with wire brush.

Poor connection→Correct.

NOTE:

After cleaning terminals, apply lightly to the

terminals.

5. Install

8 Battery

8 Battery box cover

FUSE INSPECTION

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 213 214

Comments to this Manuals

No comments

Yamaha T-50 Service Manual Page 68

Comments to this Manuals

Related products and manuals for Engine Yamaha T-50