Yamaha VZ250C Owner's Manual download pdf (Page 90)

4-15

4) Reinstall the filter element. Make sure

the O-ring is in position in the cup.

Insert the cup and O-ring into the filter

housing 6. Lift up and hold the spring

to screw the ring nut onto the filter

housing until the ring is lightly seated.

5) Tighten the ring nut approximately an

additional 1/4 turn until the ring nut is

tight. Align one of the four larger ring

nut tabs with the spring and release it

to lock the ring nut in position.

6) Run the engine and check the filter and

lines for leaks.

EMU01905

INSPECTING IDLING SPEED

8 Do not touch or remove electrical

parts when starting or during opera-

tion.

8 Keep hands, hair and clothes away

from flywheel and other rotating parts

while engine is running.

This procedure must be performed while

the outboard motor is in the water. A test

tank can be used.

60V-9-13-4 7/28/03 5:37 PM Page 16

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 123 124

No comments

Yamaha VZ250C Owner's Manual Page 90