Yamaha PDM-4210E Owner's Manual download pdf (Page 10)

Basic Playback

1 Press STANDBY/ON on the front panel to turn on the DVD

player.

2 Press / (OPEN/CLOSE) on the front panel to open disc

loading tray.

3 Place the chosen disc in the tray, with the label facing up.

4 Press / (OPEN/CLOSE) again to close the tray.

➜ After recognizing this disc, the player begin to

playback automatically.

➜ If you press PLAY when the tray is open, this unit

closes the tray and starts playback.

Notes:

– DVDs may have a region code. Your player will not play

discs that have a region code different from the region code

of your player.

– If ‘DISC LOCK’ is set to LOCK and the disc inserted is not

authorized, the 6-digit code must be entered and/or the disc

must be authorized (see ‘DISC LOCK’).

General Operation

Note: All instructions set out below refer to the remote

control, unless otherwise stated.

Video control during playback

STOP

1 You can resume the play from the point at which you

stopped last time, if you just press STOP once. It will start

from the beginning if you press STOP twice to stop

playback.

PAUSE/STEP

1 To get a still picture, press PAUSE during playback.

2 To step forward to the next frame picture, press PAUSE

again.

➜ It resumes to the normal playback for CD.

3 To resume normal playback, press PLAY.

SKIP

1 Press !1 or 2@ briefly during playback to go to the next

chapter/track or to return to the beginning of the currect

chapter/track respectively.

2 Press !1 twice briefly to step back to the previous

chapter/track.

3 To go directly to any chapter/track, enter the chapter/

track number using the numeric buttons and press

ENTER/OK.

Note: Long press of the !1 or 2@ till switch on backward or

forward search.

1 To search the contents in fast speed, press 2 or 1 for fast

forward/backward searching.

2 Press 2 or 1 again to increase the speed for searching.

3 Press PLAY to return to normal playback.

Slow Motion

1 To get a slow motion effect during playback, press 3 or

2 Press 3 or 4 again, you can get different playback

forward/backward speeds.

3 Press PLAY to return to normal play back.

1 To get a slow motion effect during playback, press 4.

2 Press 4 again, you can get different playback forward

speeds.

3 Press PLAY to return to normal play back.

Note: The SLOW BACKWARD function is not available for

VCD/Super VCD discs.

Audio control during playback

MUTE

1 Press MUTE to disable the sound output.

2 Press MUTE again to deactivate the mute.

Audio channel selection

1 Super VCD has two stereo audio channels which are

used for playing karaoke or the audio language

selection. (for instance, you can choose one channel for

only the music background of the song while you play the

karaoke.)

2 Press AUDIO to select the audio channels you want.

3 VCD has only one stereo audio channel, you can select

STEREO, MONO LEFT, MONO RIGHT or MIX-MONO by

pressing AUDIO.

➜ STEREO: Output the left and right audio channels of

the disc through the left and right audio jacks

accordingly.

➜ MONO LEFT: Output the left audio channels of the

disc through the left and right audio jacks.

➜ MONO RIGHT: Output the right audio channels of the

disc through the left and right audio jacks.

➜ MIX-MONO: each of the audio jacks can output the

same audio effect as stereo.

DVD

VCD

SVCD

DVD

VCD

SVCD

DVD

VCD

SVCD

DVD

VCD

SVCD

DVD

VCD

SVCD

DVD

VCD

SVCD

VCD

SVCD

Operation

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 26 27

Comments to this Manuals

No comments

Yamaha PDM-4210E Owner's Manual Page 10

Comments to this Manuals

Related products and manuals for DVD players Yamaha PDM-4210E