Yamaha DVD-S520 Owner's Manual download pdf (Page 10)

S-Video terminal <A>

S (separate) video connection achieves a clearer picture

than composite video connection by separating color and

luminance when transmitting signals. Use commercially

available S-video cable. Receiver (and TV) with

S-video input is required.

Composite Video terminal <B>

Use RCA video cable supplied with this unit when

connecting the DVD player to your receiver or TV.

SCART Connection <C>

If your TV has only terminal for video input, and you want

to connect it directly to the DVD player, you can use this

player’s SCART output jack.

NTSC/PAL Settings

You can switch the NTSC/PAL setting of the DVD player to

match the video signal of your TV. This setting only affects

the television’s on-screen display that shows the stop and

setup modes. You may select either NTSC or PAL. To

change the DVD player setting to PAL or NTSC, follow the

steps below.

1 Unplug the DVD player from the AC outlet.

2 Press and hold 9 and T, on the front of the DVD player.

While holding 9 and T, plug in the AC power cord.

3 After PAL or NTSC appears on the display of the DVD

player, release 9 and T at the same time. The PAL or

NTSC indicator that appears on the display indicates the

current setting.

4 To change the setting, press T within three seconds. The

new setting (PAL or NTSC) will appear on the display.

NTSC/PAL Conversion

This player is equipped with a NTSC/PAL conversion

feature to convert the video output of the disc to match

your TV system. The conversions supported are as below:

NTSC

PAL60

NTSC

Not

Supported

PAL

NTSC

PAL60

NTSC

PAL

Disc

Output format

Type

DVD

VCD

NTSC

Format

Selected mode

PAL

NTSC

PAL

NTSC

PAL

AUTO

Select among NTSC, PAL and AUTO.

See ‘Personal Preferences’ for operational procedure.

Notes:

– AUTO can only be selected when using a TV that has both

the NTSC and PAL systems.

– Slight picture distortions may occur due to this conversion.

This is normal. Thus, the AUTO format is most suitable for the

best picture quality.

General Explanation

About this manual

This manual gives the basic instructions for operating the

DVD player. Some DVDs require specific operation or

allow only limited operation during playback which may not

respond to all operating commands. When this occurs, the

symbol Ä appears on the TV screen, indicating that the

operation is not permitted by the player or the disc.

Remote control operation

¶ Unless stated, all operations can be carried out with the

remote control. Always point the remote control directly at

the player, making sure there are no obstructions in the

path of the infrared beam.

Corresponding keys on the front panel of the player can

also be used.

Menu bar operation

¶ A number of operations can be carried out via the menu

bar on the screen. The menu bar can be accessed by

pressing the cursor keys on the remote control.

¶ Pressing ON SCREEN while the menu bar is displayed

will clear the menu bar from the screen.

¶ The selected item will be highlighted and the appropriate

cursor keys to operate will be displayed below the icon.

¶ The symbols < or > indicate more items are available at

the left/right of the menu bar. Press 1 or 2 to select these

items.

PREPARATION

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 22 23

Comments to this Manuals

No comments

Yamaha DVD-S520 Owner's Manual Page 10

Comments to this Manuals

Related products and manuals for DVD players Yamaha DVD-S520