Yamaha disklavier tv User's Guide download pdf (Page 24)

DisklavierTV User’s Guide (For Disklavier Mark IV Users)

Receiving Test

You can verify that you are properly set up to receive a broadcast by viewing a test video that

can be found on the website.

Caution: •Whileyouenjoylivebroadcastoron-demandcontent:

- DO NOT use other applications except your web browser on your computer.

- DO NOT visit any other websites (other than the URL provided for the broadcast) on your

computer.

Note: •ConrmthatthevolumeonyourPCissettomaximum.

 •IfyouareusingaPCwithWindows7or8,makesureallsoundenhancementsaredisabled

(turned off). See “Appendix” on page 32 for additional detail.

Conﬁrm that all equipment and cables are connected as shown in the

“Connection Diagram.”

Conﬁrm that your Disklavier can access

the Internet.

Tap on [Internet] in the [Main] screen.

The [Internet] screen should appear.

If this screen appears, your Internet

connection is OK.

You can enjoy the DisklavierTV service using

the RemoteLive function.

If [RemoteLive] does not appear, see page

20 to log into your account.

Note: If the connection fails, the [Failed to connect the Internet] message appears. In such a

case, tap on [OK] to return to the [Main] screen. Turn off the Disklavier and make sure

the LAN cable is connected to the I/O Center ﬁrmly. Then turn on the Disklavier and

perform step 1 again. If the connection still fails, see “Setting Up the Disklavier for

Internet Connection” in the Advanced Operation Manual and check the setting.

Tap on [RemoteLive].

The [RemoteLive] screen appears.

Activating DisklavierTV

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 44 45

No comments

Yamaha disklavier tv User's Guide Page 24