Yamaha Tyros2 Owner's Manual download pdf (Page 141)

Recording Audio with the Hard Disk Recorder

Reference

141

Tyros2 Owner’s Manual

Re-recording

You can re-record the data which you created by the following four ways.

• Replace the whole data: NORMAL REC...................................................... See below

•Mix the recorded data: NORMAL REC (PLUS PLAYBACK) ................... See below

• Replace a certain range of the data: PUNCH IN/OUT....................................page 143

•Overdub a certain range of the data: PUNCH IN/OUT (MERGE) ................ page 143

■ NORMAL REC/NORMAL REC (PLUS PLAYBACK) ...........................

You can replace the whole audio data by NORMAL or mix the audio data with the previ-

ous one by NORMAL REC (PLUS PLAYBACK). The NORMAL REC (PLUS PLAY-

BACK) method does not add any tracks but simply mixes the new recording to the existing

data. (Keep in mind that the Hard Disk Recorder in this instrument is a simple stereo

recorder.) After stopping recording, the data will be erased from the stop point.

1 Press the HARD DISK RECORDER [SELECT] button and select the

recorded ﬁle to be re-recorded from the AUDIO Open/Save display.

2 Press the HARD DISK RECORDER [SETTING] button, then use the

[TAB] buttons to select the REC MODE tab.

3 Use the [A]/[B] buttons to select a recording method.

Replace the whole data: NORMAL REC

Mix the recorded data: NORMAL REC (PLUS PLAYBACK)

• Re-recording of the data repeat-

edly will result in deterioration of

the sound quality.

NOTE

• Since you will be overdubbing

parts onto this audio, it’s best to

keep the ﬁrst recording simple.

For example, you may want to

record just a rhythm pattern (such

as by playing back a style) or a

simple bass riff over which you

can add other parts.

NOTE

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 239 240

No comments

Yamaha Tyros2 Owner's Manual Page 141