Yamaha QY700 Owner's Manual download pdf (Page 90)

89Chapter 2. SONG MODE

where “interval time” refers to the number of clock cycles be-

tween interval lines. Note that positive values shift notes to-

ward the end of the song, while negative values shift them to-

ward the beginning.

1. Move the cursor to the clock-shift setting (in the grid

area) for the appropriate interval.

2. Adjust the value using the data dial, n/y , or the

numeric keypad.

13. Gate-time multiplier

• This value adjusts the gate times for each interval.

• If you are using a preset template, you can not change these

values. If you are using a user template, you can edit the

values as described below.

• The multiplier is only one of the factors determining the

final gate-time adjustment. Specifically, the gate time is

adjusted by the combined action of the multiplier and the

GROOVE GATETIME setting (see Section 9 above).

0101

1101

000%,...,100%,...,200%

1. Move the cursor to the gate-time multiplier setting (in

the grid area) for the appropriate interval.

2. Set the value using the data dial, n/y, or the nu-

meric keypad.

14. Velocity offset

• This value applies offsets to the velocity values. Again, off-

sets can be different for each interval.

• If you are using a preset template, you can not change these

values. If you are using a user template, you can edit the

values as described below.

• This offset is only one of the factors determining the final

velocity adjustment. Specifically, the velocity is adjusted

by the combined action of the offset and the GROOVE VE-

LOCITY setting (see Section 10 above).

0101

1101

–99%,...,00%,...,+99%

1. Move the cursor to the velocity-offset setting (in the

grid area) for the appropriate interval.

2. Set the value using the data dial, n/y, or the nu-

meric keypad.

(CopyTmp)

Copy template

• This function copies the currently selected groove template

into the user template for a designated song or style.

• You can set up one user template for each song, and one for

each style.

• The values in the window select the destination.

0101

1101

Destination: Song 01,...,20; Patt 01,...,64

1. At the “Groove View” page, select 5 (CopyTmp).

▼ The screen displays the Copy to User Template window.

2. Select the destination values (Song or Patt in the left

box, and the appropriate number in the right box) us-

ing the data dial, n/y, and numeric keypad.

2. Play Effects

Currently selected

groove template

User template for

selected destination

(song or style)

Copy

1 ... 89 90 91 ... 334

Comments to this Manuals

No comments

Yamaha QY700 Owner's Manual Page 90

Comments to this Manuals

Related products and manuals for Digital pianos Yamaha QY700