Yamaha DPX-1300 Owner's Manual download pdf (Page 18)

Follow the instructions to adjust the position of the projected image on screen.

This illustration shows the limits within which the

zoom function can alter projection distance [a] in

relation to screen size. You can adjust the image

within these limits so that it fills the screen

completely. ( ☞ page 26)

You can adjust the vertical position of the

projection image up or down by half of the height

of the screen. For example, shifting V.POS fully up

brings the lower limit of the image above the

centerline of the lens. (☞ page 25)

If you mount this unit on a tabletop, you can use the adjusters on its underside to change the

position of the projection image. Rotate the movable part of the two screw-type adjusters at

the front bottom of the case to adjust the height. The movement range of the adjusters is 3

cm (1-1/4 inch). Adjust with care as loosening them further than 3 cm may cause them to

separate from the unit.

Projection image position

◆ Keystone adjustment

If you mount the unit at an angle to the screen, it projects trapezoidally distorted images. You can use the [V keystone Correction] or [H

keystone Correction] item in the [Setup] menu group to rectify this. (☞ page 36)

Memo

• If the keystone is adjusted aspect ratio may not be correctly maintained. To correctly maintain the aspect ratio, try to use the DPX-

1300 with the lens shift in the center position.

• The video may be disturbed by keystone correction. Wherever possible, we recommend setting up so the screen and projector

form a right angle.

Wide Tele

Lens centerline

(When shifted

fully up)

Lens centerline

(When shifted

fully down)

11_DPX-1300_E.p65 9/20/05, 4:00 PM14

1 ... 17 18 19 ... 70

No comments

Yamaha DPX-1300 Owner's Manual Page 18