Yamaha DRX-2 Owner's Manual Page 19

  • Download
  • Add to my manuals
  • Print
  • Page
    / 79
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 18
Connecting your DVD recorder
14
English
Your DVD recorder can exchange information with your TV using “Easy Link”. Your TV
channels can also be transferred in the same order from your TV to your DVD
recorder using “Easy Link”.
Please see your TV's operating instructions.
1
Connect a SCART cable (for Easylink) to the DVD recorder’s
EXT 1 TO TV-I/O
SCART
socket.
2
Connect the other end of the SCART cable to a
SCART
input on your TV.
3
Turn on the TV.
4
Plug one end of the supplied mains cable to the DVD recorder’s
MAINS
and
the other end into an AC outlet.
5
A message appears on the screen announcing that the transfer has started. “EASY
LINK” appears on the display during transfer.
The TV transfers all saved TV channels, in the same order, to the DVD recorder.
This may take several minutes.
Initial installation is now complete.
Connecting with a SCART cable and
“Easy Link”
Notes
Time
”,
Year
”,
Month
”,
Date
” appears on the TV screen
Normally the date and time are taken from the data sent by the TV channel
stored on programme P01. If the aerial signal is too weak or there is excessive
interference, you should set the date and time manually:
1
Check if the time in
Time
” is correct.
2
If required, change the time with the number buttons
0..9
on your remote con-
trol.
3
Select the next line with
v
or
w
.
4
Check if the displayed settings for
Year
”,
Month
” and
Date
” are correct.
5
When all information is correct, save by pressing
ENTER/OK
.
Notes
I can see more installation menus on my TV set
Not all the necessary data has been transferred. Please enter the settings by
hand as follows. For more information on the various functions see “Initial instal-
lation” in “Installing your DVD recorder”.
1
Select the desired audio language using
w
or
v
and confirm with
ENTER/OK
.
2
Select the desired subtitle language with
w
or
v
and confirm with
ENTER/OK
.
3
Select the desired screen format position using
w
or
v
.
4:3 letterbox
”For a 4:3 TV set; cinema format (black bars above and below
the picture)
4:3 panscan
”For a 4:3 TV set; full height format with the sides cut off
16:9
”For a 16:9 TV set
4
Confirm with
ENTER/OK
.
5
Select the country of your residence with
w
or
v
.
If your country does not appear, select
Other
”.
6
Confirm with
ENTER/OK
.
EasyLink
loading data from TV;
please wait
Virgin mode
Audio language
Press OK to continue
English
Español
Français
Português
Italiano
DRX-2_G.book Page 14 Tuesday, October 14, 2003 5:02 PM
Page view 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 78 79

Comments to this Manuals

No comments