Yamaha BLASTER YFS200N User Manual download pdf (Page 105)

EBU00597

Transmission oil

1. Transmission oil measurement

a. Place the machine on a level place.

b. Warm up the engine for several minutes,

and stop it.

c. Check the oil level through the level win-

dow located at the right side crankcase

cover.

NOTE:

Wait a few minutes until the oil level settles

before checking.

d. The oil level should be between the maxi-

mum and minimum marks. If the level is

low, add oil to raise it to the proper level.

2. Transmission oil replacement

a. Place the machine on a level place.

b. Warm up the engine for several minutes,

and stop it.

c. Place a container under the engine.

d. Remove filler cap and drain bolt to drain

the oil.

e. Install the drain bolt and tighten to specifi-

cation.

f. Fill the engine with oil and install the filler

cap.

1. Level window 2. Maximum level mark

3. Minimum level mark

8-5

Tightening torque

Drain bolt:

20 Nm (2.0 m•kg, 14 ft•lb)

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 152 153

No comments

Yamaha BLASTER YFS200N User Manual Page 105