Appendix
XMV4280/XMV4140/XMV4280-D/XMV4140-D Owner’s Manual
28
103.
Protection has been activated, and the power supply
was shut down.
Continuous high-power output may have activated pro-
tection; lower the output level.
For details on the reason that protection was activated,
refer to “[PROTECTION] A/B/C/D indicators” (page 9).
104. Protection has been activated, and muted.
105.
A short circuit was detected in the speaker output con-
nector, so the output signal has been muted.
It may be that the speaker output connector’s “+” and “-”
are shorted, or that the connected speaker has malfunc-
tioned.
106.
The temperature of the amp section (heat sink) has
changed, and the speaker output is now ****.
**** = 0dB and OK
-1dB and in protection
muted and in protection
Continuous h
igh-power o
utput will cause high tempera-
tures, so please lower the input level or attenuator. If the
temperature is still high, check whether dirt or a foreign
object could have clogged the cooling fan’s air intake,
and clean it if necessary.
Alert number Meaning Response
Comments to this Manuals